592190
4
Zoom out
Zoom in
Previous page
1/20
Next page
4
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
When the automatic system setting had been terminate by user, the date and clock are
defaulted to
01.01.2012 ,0:00.
The alarms are defaulted to 0:00,
The radio is switched off
It then switches to auto-run mode
Default back light automatically set to dim from 23:00 to 05:59
2 How to setup the device:
When Radio is Off (Auto-Run Mode), Press <MODE|Stop> once go to different mode sequentially
Auto-run Mode with Clock display
1. Set the Clock
2. Set the Date
3. Set the SDA
4. Set update switch
5. Set
dimmer
work Mode
6. Set auto dimmer timer switch
7. Set start time of auto dimmer
8. set end time of auto dimmer
9.
Set Display mode (12/24 hour)
In clock display mode with Power OFF, the user can select alternative display for clock and date.
For details, please refer to the section of selecting alternative display.
In frequency display mode, the frequency of the radio station being received is displayed together
with the band goes solid in the display
Press <AL1> to review/set the alarm-1 when Power Off
Press <AL2> to review/set the alarm-2 when Power Off
Only when the radio is ON, press <MEMORY>, <Preset +> or <Preset -> and then <MEMORY>
again to store the current station into memory.
Only when the Power ON, press <Vol.+> and Vol. -> to adjust speaker volume
When the radio is ON, press <AMS> to store preset memory automatically for the current user.
At every minute boundary, the real time clock is compared with the alarm setting if it has been
enabled. For details, please refer to the section of ‘When alarm is active’
Note: The Radio will active in background for time update at the 3.00 & 5.00 AM
2.1 How to set the clock:
2.1.1 Press <Mode|Stop > once when the unit stays in clock display mode
2.1.2 The clock goes flashing
2.1.3 The second keeps counting up once per second
2.1.4 Press <UP> to advance the clock by 1 minute
2.1.5 Press <Down> to move the clock back by 1 minute
2.1.6 Press and hold <UP> or <Down> to set the clock in fast mode of 10 minutes per step
2.1.7 Press <Mode|Stop > once to go to set the date.
2.1.8 Press other key to start its corresponding function.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2860UMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2860UMP in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info