592190

Roadstar CLR-2860UMP Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
5
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
2.1.9 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode
2.2 How to set the date:
2.2.1 Press <Mode|Stop > twice in clock setting mode
2.2.2 The current date goes flashing in the format of dd. mm. yy
2.2.3 Press <UP> or <Down> to change the current setting by 1 day per step. Press and hold <UP> or
<Down> to change the setting in fast mode of 10 days per step. The day flag will be updated
automatically when the date has become steady.
2.2.4 Press <Mode|Stop > once to confirm the current setting and it switches to set the SDA.
2.2.5 Press other key to start its corresponding function.
2.2.6 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run automatically.
2.2.7
2.3 How to set the SDA (Special Date Alert):
2.3.1 Press <Mode> triple times when the unit stays in “SDA” mode
2.3.2 The DATE & ‘SDA 1’ goes flashing alternative
2.3.3 Press <MEM Scan> to select 1-6 SDA which want to set
2.3.4 Press <Up> or <Down> to set the Special Date.
2.3.5 Press <MEM>to enter SDA hour select mode
2.3.6 Press <Up> or <Down> to set the hour
2.3.7 Press <Timer> to ignore the year
2.3.8 Press <Mode|stop > once the current setting is confirmed and switches to Setting update mode
2.3.9 Press other key to start its corresponding function.
2.3.10 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
In case of ignore the year the SDA will be active ever year at same date
2.4 Update setting mode:
2.4.1 Press <Mode|Stop > for 4 times into update made selection, press “Down” tune off update function ,
RDS automatic update function will be shut off and “RDS” mark disappear.
2.4.2 Press <UP> once to select “UP DATE ON “, RDS automatic update function becomes active and the
“RDS” mark appear.
2.4.3 Press <Mode|Stop > once to confirm the current setting and it switches to Set dimmer
2.4.4 Press other key to start its corresponding function.
2.4.5 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.5 How to set the dimmer:
2.5.1 Press <Mode|Stop > for 5 times into dimmer switch mode,
2.5.2 press “Down” or “UP” tune off or tune on dimmer function
Key Press Display Function
Down DIM OFF Dimmer Off
Up DIM ON Dimmer On
2.5.3 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.6 How to set Automatic Dimmer / Timer:
2.6.1 Press <Mode|Stop > for 6 times into setup of dimmer timer switch mode, press “Down” or “UP” tune
off or tune on dimmer function
2.6.2 When the timer switch on, back light will automatically dim from 23:00 ~ 05:59, press any key could
be brighter for 60 second.
Key Press Display Function
Down
DT OFF
Dimmer Timer off
Up
DT ON
Dimmer Timer on
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2860UMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2860UMP in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info