744703
15
Zoom out
Zoom in
Previous page
1/36
Next page
|15
EN
14
key display description
EASY OFF
IGNIT
START
EASY 35
Pressing starts the unit.
This is shown by IGNITE in the display; this is
replaced by START after a brief time.
EASY xx appears in the display after the
start phase (xx stands for a value between
30% and 100%, depending on output)
to change the power setting
press „+“ or „-“ keay (the setting will be changed in 5% steps
single press
EASY
EASY
O FF
IGNIT
START
50
Stopping during ignit or startphase
If switching off occurs again 50 sec. within switching on ( -key) (at least 2
sec. -key), the pellet stove returns to inactive status.
If switching off occurs during the ignition process (IGNIT or START) (at least 2
sec. -key), IGNIT OFF or START OFF appears in the display and the burn-out
phase is initiated. The pellet support stops - the flue gas fan continues to burn
any pellet residues (approximately 10 minutes). The stove changes to EASY
OFF.
EASY 40 – operation
key display description
EASY 40
Standard display for stove switched on in
simple heating mode. (40 is the output in %)
EASY 45 Pressing increases output by 5%
EASY 40 Pressing decreases output by 5%
Cleaning and tipping during operation
The automatic cleaning process is conducted every hour for approx. 2 minutes.
During this phase the air vents that are necessary for combustion are blown
clean.
Great cleaning phase (only stoves with automatic turning grid):
The pellet stove enters the burnout phase every 7 hours. A tipping process is
conducted automatically. The start-up phase is automatically re-initiated after
completion of the burnout phase and operation continues
EASY 40 – switch off
key display description
STOP
EASY OFF
The burnout phase is initiated by pressing for
at least 2 seconds (until the change is visible
on the display). The pellet support stops -
the flue gas fan continues to burn any pellet
residues (approximately 10 minutes).
The stove changes to EASY OFF.
change power setting by
pressing the „+“ or „-“ key
(change in 5 % increments)
single press
pressing the button
(until the change is visible
on the display)
EASY
EASY
O FF
IGNIT
START
50
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Pico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Pico in the language / languages: English as an attachment in your email.

The manual is 20,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Pico

Rika Pico Additional guide - English - 12 pages

Rika Pico User Manual - German - 36 pages

Rika Pico Additional guide - German, Dutch - 12 pages

Rika Pico User Manual - Dutch - 36 pages

Rika Pico Additional guide - French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info