744703
13
Zoom out
Zoom in
Previous page
1/36
Next page
|13
EN
12
6. ASSEMBLY/DISMANTLING STONE AND OPTIONS
Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.
Disassembly of the front side casing
Open the firebox door.
Lift the top panel slightly.
Remove the two knurled screws on the bottom inside of the panel. Turn the
panel carefully under the convection fins.
Rotate the side panel to the front and pull the panel below the convection fins
out.
Lift the lower panel slightly and pull it towards the front.
Open the front and rear flat-head screw, which fastens the left and the right
cover panel.
Note
Watch out to the display wiring when lifting the right cover. Unplug the control
panel before you lift off the right cover panel completely.
Remove the 4 hex screws used to attach the convection fins.
Open the two remaining hex screws (one in front, one in the back), which are
used to fasten the left and right side cover.
Install the removed parts in reverse order.
#3
#8
#8
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Pico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Pico in the language / languages: English as an attachment in your email.

The manual is 20,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Pico

Rika Pico Additional guide - English - 12 pages

Rika Pico User Manual - German - 36 pages

Rika Pico Additional guide - German, Dutch - 12 pages

Rika Pico User Manual - Dutch - 36 pages

Rika Pico Additional guide - French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info