744703
14
Zoom out
Zoom in
Previous page
1/36
Next page
14
7. INTERNAL CONTROLS
The stove has a modern programmable microprocessor control. The individual
unit functions can be preset by the user via the internal controls located in the
right casing (keyboard with operating display).
Basics
Note
Manipulation of hardware components may only be performed by trained
specialist dealers and service. Incorrect handling of these parts leads to
loss of warranty and guarantee claims!
Note
The unit may only be put into operation when assembled completely!
Operation
All settings and functions can be controlled via this unit.
MENU
The display is illuminated when touched. After some seconds the display lighting
turns off again.
EASY MODE ‑ simple heating operation
Your stove is in simple heating mode EASY OFF when delivered in order to ease
your start in the world of RIKA pellet stoves. The heat output of the stove can
only be increased or reduced in 5 % increments in this mode. As soon as the
stove is connected to the socket, the standard display EASY OFF appears.
The message „CHECK“ appears in the display as soon as your pellet stove is
connected to the power supply (even after a power failure). The display buttons
are disabled for approx. 10 seconds as the stove conducts an initialisation of
all components. When „CHECK“ disappears from the display the stove can be
started up.
"CHECK" appears in the display whenever
the stove ist re-supplied with power.
CHECK
EASY OFF ‑ inactive state
key display description
EASY OFF
Standard display for stove switched off in
simple heating mode.The output can also be
regulated between 30% and 100% with the
stove switched off (EASY 30 – EASY 100).
EASY 45 Pressing increases output by 5%
EASY 35 Pressing decreases output by 5%
Start ‑ scavenge ‑ tip ‑ ignition
The pellet stove is started in the scavenging phase by pressing the button.
The scavenging phase lasts approx. 50 seconds and is used to eliminate any
adverse draft conditions in a cold flue. The grate tips automatically during the
scavenging process and any ash leftover from the previous combustion phase
falls into the ash tray.
Depending on the fill level of the screw conveyor the ignition process can take
approx. 5 to 30 minutes until the first flame is visible.
If the first ignition attempt is unsuccessful, further ignition attempts will be
initiated automatically. This may occur if the screw conveyor is not completely
full during the ignition process (e.g. first start after refilling empty container).
Note
In the event of a false start remove any unburnt pellets and ash from the
combustion cavity. Never replace unburned pellets from the fire pot in the
supply container.
FIRE HAZARD DUE TO RESIDUAL EMBERS
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Pico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Pico in the language / languages: English as an attachment in your email.

The manual is 20,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Pico

Rika Pico Additional guide - English - 12 pages

Rika Pico User Manual - German - 36 pages

Rika Pico Additional guide - German, Dutch - 12 pages

Rika Pico User Manual - Dutch - 36 pages

Rika Pico Additional guide - French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info