Manual Rika Domo Multiair (page 36 of 48) (English, German, Dutch, French, Italian)

744646

Zoom out

Zoom in

1/48

Note

All cables must be protected from heat. Improper installation can

damage your stove and void your warranty.

Run the cables further through the two recesses at the heat

deﬂectors.

Run the cables between the here shown transparent supply air duct

and the conveyor trough back to the green marked vertical cable

duct.

Loosen the nut and the ring from the capacitor till the end from the

thread.

Attach the condenser (with 2 blowers both capacitors) in the free

slots behind the cable channel.

In the cable channel are the three pin connector M3 for the upper

convection fan 1 and the plug M4 for the lower convection fan 2.

Insert the correct cable and put all cables and plugs back into the

cable channel.

Install the rear wall of the stove. It is mandatory to attach the motor

cover on the rear wall.

Note

Operation without a motor cover and without air duct is not allowed

for security reasons. Disregard voids your warranty and no liability

is accepted for damage.

Function test and settings

Connect the power cord back in and select the Setup menu /

submenu Service. Perform a relais test to check the correct function

of the Multi Air fan.

Select the Setup menu /submenu MultiAir fan. Switch the

MultiAir 1 to ON and you will get access to fan speed and fan

adaptation.

Fan level

The volume of convection air is adjustable from AUTO (adapts

automatically according to heating power), over to Level 1 (min) and

level 5 (max).

Fan area

In addition, it is possible to adapt the Multi Air fan speed (AUTO, level

1 to level 5) within +/- 30% of fan speed.

#13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rika Domo Multiair in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 19,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rika Domo Multiair Manual

Product: