692210
55
Zoom out
Zoom in
Previous page
1/64
Next page
55
j) Stopping the printing process
Select "Cancel print" in the "Cura software" to stop printing.
Data is buffered by the software, therefore it may take up to 1 minute for the 3D printer to stop printing.
Do not select "Cancel print" when the nozzle is heating, otherwise you may have to remove the USB cable
and restart the 3D printer.
The nozzle temperature will be kept constant after the print task is cancelled. To cool the nozzle, set the
temperature to 0 °C and select < Move axis > from the 3D printer menu to move the print bed downwards.
Remove the USB cable and restart the 3D printer.
17. Updating the 3D printer rmware
This version of the instructions is valid for rmware version 2.1 or higher. Check for rmware updates on a regular
basis.
a) Displaying the rmware version
Go to the < ReadyPrint > main menu and select < Setting > to open the < Set > menu.
Select < About > from the < Set > menu.
The rmware version number will be displayed.
b) Performing a rmware update
To download the latest rmware version, visit www.conrad.com/downloads or scan the QR code
on this page.
Unzip the rmware folder, which contains the following three les:
- mks_pic
- mks_cong.txt
- mkstft28.bin
Copy these three les to the SD card.
Switch the 3D printer off. Insert the SD card into the card reader on the 3D printer.
Switch the printer back on. The 3D printer will automatically start the update when the SD card is detected. The
update progress is shown on the display.
Do not remove the SD card from the card reader during the update, as this may cause irreparable
damage.
The < ReadyPrint> menu will be displayed when the rmware update is complete.
Check the current rmware version (see “a) Displaying the rmware version” on page 55 for details).
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL plus in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL plus

Renkforce RF100 XL plus User Manual - German - 62 pages

Renkforce RF100 XL plus User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info