726821

REMKO RVS DC serie 50-80-130-180 Manual

20
Zoom out
Zoom in
Previous page
1/44
Next page
Installation materials
The unit is fastened on vibration
dampers (accessories) to the floor
by means of bolts. The carrying
capacity of the bracket and
the wall must be taken into
account when fastening to
the wall.
Definition of the Danger Area
Access to the unit is only permitted
for authorised and trained persons.
If unauthorised persons can
approach the danger areas, these
areas must be identified with
corresponding signs, barriers, etc.
■
The external danger area
surrounds the unit up to
a distance of 2 m, measured
in all directions from
the unit housing.
■
The external danger area on-
site can differ as a result of the
setup. The specialist company
performing the installation work
bears the responsibility for this.
■
The internal danger area is
located inside the machine
and can only be reached with
the use of an appropriate
tool. Access is prohibited for
unauthorised persons!
Installation
NOTE
Installation should only
be performed by authorised
specialists.
Unit installation
1. Install the vibration dampers
(accessories) under the unit
(accessories).
2. Attach the unit to the building
where structurally permitted.
Refer to the Selecting
the installation location
chapter for this.
3. When installing the unit,
ensure that the minimum
clearances described
hereafter are complied with.
Any infringement of these
stipulated clearances can result
in a functional impairment
of the unit operation.
Disassembly of the transport
pallets
The units are supplied with
transport pallets for the purpose
of transportation. Remove these
before installation.
Transport packaging
Transport pallet
4. Ensure that structure-borne
sound is not transferred to parts
of the building.
5. Connect the medium piping.
6. Connect the unit electrically.
NOTE
The electrical connection
of the unit is to be established
by suitable specialist personnel
and in compliance with all
electrical safety regulations.
Compliance with VDE
regulations is essential.
NOTE
The dimensioning of the supply
line and the selection of
the customer-side unit safeguard(s)
is the responsibility of the specialist
company carrying out the work.
The unit manufacturer provides
no information regarding
the dimensioning of pipework
or the selection of fuses/breakers
as these are subject to local
conditions. All of the data required
for the selection can be found
in the technical data for the unit.
NOTE
The selection of the RCD
breaker is the responsibility
of the specialist company
carrying out the work. Based
on theprovisions per VDE 0160,
E VDE 0100 Part 530 as well
as the guidelines of VdS 3501
and the safety regulations from
BGI 608, the use of an AC/
DC-sensitive, type-B RCD
is recommended for ensuring
standards-compliant personnel
and fire protection.
REMKO series RVS
20
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RVS DC serie 50-80-130-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RVS DC serie 50-80-130-180 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RVS DC serie 50-80-130-180

REMKO RVS DC serie 50-80-130-180 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info