587574
8
Zoom out
Zoom in
Previous page
1/20
Next page
Mounting on an external wall
with wall bracket
Fasten to the wall using the
supplied wall bracket.
Hook the outdoor unit into the
wall bracket and secure it with
the supplied M4 bolts
(Fig 4 and 5).
The wall brackets can be fastened
with the supplied fastening ele-
ments (dowel 6mm and screws).
External wall mounting with
fastening straps
Fastening straps are an additional
option for mounting the outdoor
unit to an external wall or parapet
wall.
Hook the wall bracket onto the
outdoor unit and secure it with
the screws (M4).
Hook one end of the fasten-
ing strap with the spring catch
into the fastening eyelet of the
outdoor unit.
Hook the other end of the fas-
tening strap into the eyelet bolt
which is to be attached to the
on-site external wall or parapet
wall (Fig. 7).
Ensure sufficient stability.
20 cm
max. 1.8 m
Spring catch
Fastening eyelet
Safety
bolt M4
Eyebolt
Safety bolt M4
353 mm
220 mm
Should this not be suitable for the
characteristics of the wall then
the fastening elements should be
selected on site to ensure suitable
holding force.
When mounting, ensure that the
cable is not stressed and that the
insulation is not damaged in the
process.
Maintain the minimum gaps.
The air outlets of the indoor and
outdoor units may not be blocked.
Mounting height
The outdoor unit (lower edge) may
only be mounted max. 1.8 m
above the installation level of the
indoor unit (Fig. 6). If the outdoor
unit is mounted below the installa-
tion level of the indoor unit, then
the height difference may not
exceed 1.5 m.
4 Required air circulation
5 Gaps assembly bracket 6 Max. assembly height 7 Assembly with fastening straps
Depending on weather conditions it is possible that condensate will
run out of the condensate drain on the rear of the outdoor unit.
This is a normal process. Select the installation site for the outdoor
unit in such a way as the draining water cannot cause any form of
damage or hook up the connection to a drain.
NOTE
REMKO RKL
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKL490 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKL490 DC in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKL490 DC

REMKO RKL490 DC User Manual - German - 16 pages

REMKO RKL490 DC User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info