587901
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
REMKO PGT (E) series
1. Close the shut off valve(s) of
the gas supply system and allow
the gas flame to burn out.
2. Move the operating
switch to the "0"
(Off) position.
3. If the units are
inactive for long
periods, disconnect
them from the mains
power supply.
Shutdown Care and maintenance
s
s
s
Ventilate
In this operating mode, the supply
air fan runs permanently.
The units can be used for air
recirculation or ventilation
purposes.
1. Close the shut off valve(s)
of the gas supply system and
allow the gas flame to burn out.
2. Move the operating
switch to the "II"
(Ventilate) position.
Thermostatic control as well
as heating operation is not possible
in this operating mode.
CAUTION
The units must not be used
below ground level
, e.g.
in basements, without suitable
gas monitoring equipment.
NOTE
Overpressure and underpressure
in the installation area
should be avoided as this will
inevitably lead to combustion-
related faults.
NOTE
For optimum operation
the units should not
be operated above an ambient
temperature of 25 °C.
NOTE
Important notes on the post-
cooling phase for units with
automatic fan run-on (PGT
100 series, PGT 30/60 as
option).
The automatic fan run-
on serves to avoid heat
accumulation inside the unit
after the burner is switched off.
For this reason the electrical
connection must not be
disconnected from the
mains power supply before
the cooling phase has ended,
except in an emergency.
In accordance with the operating
conditions, the units must be
checked as and when required,
but at least every two years,
by a specialist to ensure that they
are in a condition that is safe
to use.
The results of this test must
be recorded in a test certificate.
The test certificate must be stored
until the next test and presented
for inspection by authorised
persons on request.
Keep the units free of dust and
other deposits
Only clean the units with
a dry or moistened cloth
Never subject to direct jets
of water.
e.g. pressure washers etc.
Never use abrasive or solvent-
based cleaners
Use only suitable cleaners, even
for heavy contamination
NOTE
Regular care and maintenance,
at the latest after every
heating period, is the basic
requirement for a long service
life and malfunction-free
operation of the units.
CAUTION
Before undertaking any work
on the unit, the gas supply
must be shut off and the power
plug must be removed from
the mains socket.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO PGT 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO PGT 60 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO PGT 60

REMKO PGT 60 User Manual - German - 28 pages

REMKO PGT 60 User Manual - Dutch - 24 pages

REMKO PGT 60 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info