587901
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Setting and controlling
the heating capacity
The desired or required heating
capacity can be steplessly set
on the “power regulation”.
The heating capacity can also
be steplessly changed during unit
operation.
Safety distances
For safe operation, a 1 m safety
distance must be maintained
around the unit
A minimum distance of 3 m
must be maintained from
the unit outlet
Flooring and ceilings must
be fire retardant
Heating without room thermostat
The units operate in continuous
operation without room
temperature regulation.
1. Connect the strapping plug
2 supplied with the thermostat
socket 1 on the unit.
2. Move the operating
switch to the "I"
(Heating) position.
The supply air fan starts up
and the automatic burner starts
the unit after approx. 15 seconds.
NOTE on polarity!
If the unit should implement
a fault shut-down during the start
phase, first check the polarity
of the power supply by turning
the power plug through 180°.
It may be necessary
to repeat this process
with a change in
position or new socket
assignment!
Heating with room thermostat
(Accessories)
The units operate fully
automatically and according
to the room temperature.
1. Pull out the strapping plug 2.
2. Connect the plug 3 of
the room thermostat 4 with
the thermostat socket 1
on the unit.
3. Place the room thermostat 4 at
a suitable location in the room.
The thermostat sensor must not
be located directly in the warm
air flow and must not be placed
directly on a cold floor.
4. Set the desired temperature
on the room thermostat 4.
5. Move the operating
switch to the "I"
(Heating) position.
The unit starts automatically after
a brief burner pre-ventilation if
heat is required and then runs fully
automatically.
1
2
3
1
4
s
s
s
Turning to the left:
higher heating capacity
Turning to the right:
lower heating capacity
CAUTION
It must be ensured that supply
air can be freely sucked in and
that heated air can be blown
out without obstruction.
The unit intake and outlet
must not be restricted or fitted
with hoses or pipes.
CAUTION
In case of a gas leak, halt unit
operation immediately.
All gas shut-off valves must
be closed and the units
disconnected from the power
supply.
CAUTION
It is essential to observe
the necessary safe distances
from flammable and fire
hazardous materials.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO PGT 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO PGT 60 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO PGT 60

REMKO PGT 60 User Manual - German - 28 pages

REMKO PGT 60 User Manual - Dutch - 24 pages

REMKO PGT 60 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info