587595
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Automatic mode
In automatic mode, the control mechanism operates in cooling mode.
A target temperature of 24°C is permanently set. The range lies between 22°C and 26°
C. This can be increased or decreased by 1°C with the buttons.
Functional process
Functional process
COOLING MODE
MODUS
Cooling mode
In cooling mode, the room air is cooled to the set target temperature. The desired room
temperature is set in 1°C increments with the buttons. If the temperature is
1°C above the set target temperature, the indoor unit begins to cool the room air. If the
room temperature falls approx. 0.5°C below the set room temperature, the control
mechanism switches cooling mode off. To protect the compressor, the control mecha-
nism is first reactivated after 3 minutes have elapsed.
Dehumidifying mode
In dehumidifying mode, the room temperature is decreased to 24°C. Due to the low
temperature of the refrigerant, the temperature of the fin exchanger falls below the dew
point of the air. The excessive moisture in the air condenses on the fin-exchanger and
the room is dehumidified. The fan speed should be set to automatic to reach maximum
dehumidification capacity. In automatic mode, the fan switches on and off at intervals.
DEHUMIDIFICATION MODE
MODUS
Functional process
Heating mode
This mode is not available.
Mode button Use the MODE button to select the individual operating modes. There are 4 modes
available:
1. Automatic, automatic selection of cooling or heating mode
2. Cooling, operating mode primarily for summer
3. Dehumidifying, summer or winter operating mode
4. Heating, not available
Functional process
MODE MODE MODE MODE
Automatic Cooling Dehumidifying Heating
MODE
COOLING MODE
FAN button
The fan speed is selected with this button. You can select either low, medium, high or
automatic fan speed.
Functional process
FAN FAN FAN FAN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML520 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML520

REMKO ML520 User Manual - German - 28 pages

REMKO ML520 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info