726822

REMKO KWE serie 150-180-220-250-300-320-370-440 Manual

43
Zoom out
Zoom in
Previous page
1/60
Next page
Open the window “c. Thermal regulation”.
+
!
Service menu 2/7
Thermoreg. Gfc16
Service menu 2/7
Thermoreg. Gfc16
Primary circuit
Primary cir.antifreeze
°C
Primary cir.antifreeze
alarm diff.: 3.0°C
alarm setp.: 4.0
Set the frost protection alarm value.
+
!
Service menu 2/7
Thermoreg. Gfc16
Service menu 2/7
Thermoreg. Gfc16
Primary circuit
Primary cir.antifreeze
°C
Primary cir.antifreeze
°C
alarm setp.: -15.0
alarm diff.: 3.0
Set the value for the alarm difference. If the differ-
ence is exceeded, the alarm is reset.
+
!
Service menu 2/7
Thermoreg. Gfc16
Service menu 2/7
Thermoreg. Gfc16
Primary circuit
Primary cir.antifreeze
°C
Primary cir.antifreeze
°C-
alarm setp.: -15.0
alarm diff.: 4.0
This completes the configuration.
Diaphragm expansion vessel (MAG)
To avoid pressure fluctuations during standstill
because of temperature changes, diaphragm
expansion vessels filled with nitrogen (moisture
neutral) must be integrated in the system.
The unit's standard equipment includes one dia-
phragm expansion vessel. The preliminary pres-
sure must be set on the system; an increase in
volume or
, in the event of the realisation of a
cooling-heating system, the installation of another
diaphragm expansion vessel may be necessary.
Compensators
Compensators are used to connect lines to the unit
to prevent vibration in the chiller from transmitting
to other system components.
2
1
4
3
1: Static fastening
2: Shut-off valve
3: Compensator
4: Connection KWE
Safety valves
Safety valves limit excess operating pressure due
to excess warming or overfilling of the operating
medium. The valve outlet requires unobstructed
draining into a drain line. Applicable local disposal
ordinances must be observed if glycol is used. The
unit's standard equipment includes one safety
valve.
Shut-off valves
As a rule, in cold water systems, shut-off valves
with full admission should be used. For the pur-
pose of servicing, medium inlet and medium outlet
must be equipped with shut-of
f valves (if necessary
safety valves).
Air bleeding valves
The unit has manual air bleeding valves. The unit
can be bled separately after the system has been
filled. Automatic bleeding valves must also be
installed at the highest point in the collector line.
NOTICE!
Glycol tolerant air bleeding valves are neces-
sary when using media that contain glycol.
43
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWE serie 150-180-220-250-300-320-370-440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWE serie 150-180-220-250-300-320-370-440 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWE serie 150-180-220-250-300-320-370-440

REMKO KWE serie 150-180-220-250-300-320-370-440 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info