587906
35
Zoom out
Zoom in
Previous page
1/44
Next page
35
Conversion to a different type of
gas locally must only be carried out
by authorised specialists.
Prior to conversion, the country-
specifi c requirements must be
fulfi lled.
The kit for converting from natural
gas to LPG is described below.
Conversion kit contents:
Calibrated membrane
Ignition fl ame nozzle
Label “unit converted to...”
After adjustment, replace the
label “unit adjusted to...” with
the supplied label “unit converted
to…”
The procedure for conversion is as
follows:
Disconnect the mains supply to
the unit in all poles.
Carefully replace the ignition
nozzle.
Carefully fi t the calibrated
membrane between the gas
valve and Venturi tube.
Reconnect the mains supply to
the unit and prepare the unit
for starting.
During the ignition process,
check that no gas escapes at
the connection between the
nozzle and copper tube.
With the burner in operation and
at maximum output, check the
following:
1) That the pressure upstream of
the gas valve corresponds to
the value prescribed for the
respective type of gas.
2) The CO2 content corresponds
to the values prescribed for the
respective type of gas.
If the measured value deviates, it
must be corrected with the CO2
regulating screw.
The CO2 value decreases when
the screw is tightened.
The CO2 value increases when the
screw is unscrewed.
Recheck the tightness of the gas
system.
Type of gas LPG G30 – G31
Model GPM 15 GPM 25 GPM 35 GPM 55 GPM 75
Ø Ignition nozzle mm 0.51 0.51 0.51 0.51 0.51
Ø Gas membrane mm 4.5 5.0 5.1 6.5 6.5
Fitting the membrane of
model GPM 75
Fitting the membrane of models
GPM 15/25/35/55
The hot air heater supplied
for operation with LPG is
adjusted for gas G31. For
operation with G30, the
CO2 must be checked and
readjusted if necessary.
ATTENTION
We reserve the right to make changes to dimensions and design in the interest of technological advances.
Adjustments and maintenance
must only be carried out by
authorised specialists.
NOTE
Converting to LPG
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO GPM 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO GPM 25 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO GPM 25

REMKO GPM 25 User Manual - German - 44 pages

REMKO GPM 25 User Manual - Dutch - 44 pages

REMKO GPM 25 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info