587925
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
Frost Protection Temperature
The frost protection temperature is fixed at 5 °C. By pressing the two pro-
gram buttons + and at the same time, the frost protection temperature can
be selected.
Off
By pressing the two program buttons ¹ and + at the same time, the control
is switched off. The operating mode is no longer displayed on the right-hand
side of the display. The unit continues to record the current temperature but
all control functions are completely switched off.
Hand Button
The > button makes it possible to change the current temperature opera-
tion (comfort temperature / cooling temperature) in automatic mode. The se-
lected temperature mode is displayed by indicators on the right-hand side of
the display. This function is deleted the next time the program is opened.
Reset
There are two different reset options:
1. Start up reset:
The RESET button makes impossible to restart the unit after operation has
been to interrupted due to a malfunction. The clock must be reset but the
program and parameter settings are retained.
2. Global reset:
To force the unit to restart with the factory settings, the buttons RESET, +
and must be pressed at the same time. After the RESET button is re-
leased, the buttons + and must be held down until the version number
(r 10...) appears on the display. The clock must be reset, Any previously en-
tered individual timer program and any parameter settings are lost.
Day and Night Temperature
The target values for day and night temperature can be set independently of
one another and are standard for the control depending on the operating
mode (day or night operation). The minimum target values can be limited to
5°C by an internal setting.
LCD Display of the Clock Timer
The timer, day of the week and current tempera-
ture of the temperature sensor are shown on the
LCD display. By pressing the SET program but-
ton, the temperature of the 2nd temperature sen-
sor can be displayed for approx. 3 seconds.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATR-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATR-3 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATR-3

REMKO ATR-3 User Manual - German - 24 pages

REMKO ATR-3 User Manual - Dutch - 16 pages

REMKO ATR-3 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info