587925
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Setting the Clock
The clock can be set once the ¹ program button
has been held down for 3 seconds or after the
unit restarts following a reset. If the clock has not
yet been reset, it blinks on the display.
When you press the SET program button, you are taken to the desired set-
ting option (Hours -> Minutes -> Day of the week). The selected option
blinks on the display.
By pressing one of the program buttons + or –, the value of the selected op-
tion can be changed and the selection confirmed by pressing the SET button.
After confirming the day of the week, the clock starts accurate to the sec-
ond. The unit returns to the operating mode from which the “
Set Clock
menu was accessed. If no button is pressed within 1 minute, the current
time automatically appears again.
Programming example: Monday, set 10:16
Selecting the Operating Mode
Display Button Explanation
1.
¹
Change time setting
2. 20:30 +/- Hours blinking; change setting with [-]
3. 10:00 SET Confirm entry
4. 10:00 +/- Minutes blinking; change setting with [+]
5. 10:16 SET Confirm entry
6.
*
+/- Day of the week blinking; change setting with [+/-]
7.
*
SET Confirm entry and transmit programming
The main operating modes are selected by
pressing one of the three program buttons on the
left. You can select from the following modes:
Automatic ¹, Comfort á(continuous) and Cool-
ing (continuous).
The Off and Frost protection T modes can be set by pressing the top and
middle or bottom and middle program buttons on the left at the same time.
The selected operating mode is displayed by indicators on the right-hand
side of the display. In the
Automatic operating mode, one of the two indica-
tors also shows the currently valid temperature control (Comfort or Cooling).
No indicator is displayed in the Off operating mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATR-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATR-3 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATR-3

REMKO ATR-3 User Manual - German - 24 pages

REMKO ATR-3 User Manual - Dutch - 16 pages

REMKO ATR-3 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info