719938
9
Zoom out
Zoom in
Previous page
1/200
Next page
9
ENGLISH
Express Mode F
Express Mode provides the user with a time friendly option for treatments. You may treat larger areas with this mode at
a faster rate, but it may be less eective and will take a few more treatments to see the desired results.
NOTE: Whenever the device is turned on, it automatically defaults to Power Mode (Full Power).
If you wish to select an alternative mode, press and hold the desired button to illuminate it.
Once you have decided and chosen which operating mode is right for you, put the treatment window rmly against
your skin.
The device is now ready to trigger the rst ash. To deselect the Sensitive or Express Mode, simply press the
selected button again and the unit will revert back to Power Mode with only the Flash Button illuminated.
TREATMENT
CHANGING ATTACHMENTS
Your i-LIGHT comes with two separate Treatment Caps.
The Body Treatment Cap is for use on larger areas such as body hair.
The Precision Treatment Cap is intended for use on smaller areas such as female facial hair, underarms and bikini
area.
To change attachments:
WARNING: Always ensure the unit is OFF and the power cord is disconnected before removing the Treatment Cap.
Allow the system to cool down for 5 minutes before attempting to change the Treatment Cap
1. Turn the Power Switch OFF and unplug the Power Cord from the electrical outlet.
2. Hold the device with one hand while gently pulling the Treatment Cap with the other (Fig. 13).
NOTE: Treatment Caps are magnetically held onto the device and should pull o easily.
TIP: Store the unused Treatment Cap in a safe location taking care not to damage the ash window and other
components.
3. Gently push the other Treatment Cap back onto the device making sure it clicks into place.
How to treat:
1. Place the Flash Window rmly against the skin - ensure the Skin Contact Sensors are fully engaged. If the
Skin Contact Sensors are in full contact, the ash button on the device will pulse white and the LEDs on
the side of the hand piece will light up indicating the device is ready to ash.
NOTE: If the Skin Contact Sensors are NOT in full contact with the skin, the device will not operate if you press the
Flash Button and it will beep. Double check that the Skin Contact Sensors are in full contact with the skin.
2. Press the ash button to deliver a ash. You should expect to see a bright ash of light (similar to a camera ash)
and you should feel a mild sensation of warmth.
3. Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
For single-ash mode, press the ash button each time you move to the next area.
For multi-ash mode, keep your nger on the ash button to keep it depressed and glide to the next area being
sure to keep the Skin Contact Sensors fully engaged. The next ash will be delivered automatically after 3 seconds
(in Full Power Mode).
During multi-ash mode if you let go of the ash button or lose skin contact, simply resume treatment by
repeating the above steps.
Facial Treatment (female use only)
Facial hair can be very dierent to body hair and the skin on the face tends to be sensitive and more likely to be
exposed to the sun’s rays; therefore treating unwanted facial hair is dierent to treating the body – please be sure to
read the Warnings and Safety Precautions carefully before beginning a facial treatment.
IMPORTANT: The Precision Treatment Cap has been specially designed to treat the unique characteristics of female
facial hair. We would therefore advise against using the Body Treatment Cap on the face as this has been designed to
treat large areas below the neck. See section ‘Changing Attachments’ for more information.
The Precision Treatment Cap is intended for use on female facial hair on the cheek, sideburn, chin, neck area and above
the lips (Fig. 2). It can also be used on other smaller areas such as the underarms and bikini area.
DO NOT use on male beards or facial hair as the results may be permanent or uneven which may produce changes in
facial characteristics which may not be desirable.
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
BG
AE
HR
UA
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL8500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info