Manual Remington IPL8500 (page 8 of 200) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719938

Zoom out

Zoom in

1/200

PREPARING FOR USE

PREPARE YOUR SKIN FOR TREATMENT

• Ensure the area to be treated is clean and free from oils, deodorants, perfume, make up, lotions and creams. Shave

the hair from the area to be treated, and ensure the skin is clean and dry.

• For facial use, you may prefer to trim the hair. If trimming, the hair must be trimmed to less than 0.5mm.

• Never use wax, epilation, tweezers or other methods that remove the hair from the root as IPL is not eective if the

hair has been pulled out.

PREPARE THE i-LIGHT FOR USE

• Connect the power cord to the wall outlet.

CHECK YOUR SKIN TONE

• To determine if your skin tone is suitable for use with the device, compare your skin in the intended treatment areas

with the Skin Tone Chart (Fig 1) at the front of this manual.

• If your skin matches either the light, medium or dark skin tones in the Skin Tone Chart (I-V), you can use this i-LIGHT

device.

• If your skin in the intended treatment area matches the darkest skin tone in the Skin Tone Chart, DO NOT use the

device (Skin Tone VI).

• This i-LIGHT has a built-in SKIN TONE TESTER on the treatment head that is designed to help prevent inadvertent

ashing on skin that is too dark for treatment.

• If your skin is suitable for treatment i-LIGHT will provide a ash and the LED lights on the side of the hand piece will

illuminate white. The number of lights illuminated will indicate your Skin Tone.

• If your skin is too dark for treatment, you will receive a low energy ash followed by four audible beeps and the LED

lights on the side of the hand piece will illuminate red.

• If you believe your skin is suitable based on the Skin Tone Chart (Fig 1), but the device ashes and four audible

beeps follow, try another treatment area.

TEST THE i-LIGHT ON YOUR SKIN

Before your rst full treatment, test the i-LIGHT on a small patch of skin and wait 24 hours to ensure there are

no adverse reactions.

1. Place the i-LIGHT hand piece against your skin so the Flash Window is ush with the skin surface.

2. Ensure the Skin Contact Sensors are fully engaged and that the LED lights illuminate white.

3. Select your preferred mode and press the ash button to deliver a ash.

TIP: As mild to moderate discomfort is normal, you may want to start with Sensitive Mode only switching to Power

Mode when you feel comfortable in doing so.

4. Wait 24 hours and then look at the test area. If the skin appears normal, proceed with your first full treatment using

the mode that you determined is right for you.

NOTE: You must test the device on each area of the face or body you wish to treat.

SELECTING THE OPERATING MODE

• The integrated SKIN TONE TESTER on the treatment head will set the appropriate power level for each setting

based on the skin tone registered.

• This i-LIGHT device has 3 dierent operating modes, Power Mode (Full Power), Sensitive Mode and Express Mode.

The unit will be in Power Mode when it is turned ON. It will ash approximately every 3 seconds on Power Mode and

Sensitive Mode and less than 1 second on Express Mode.

Power Mode H

Power Mode (Full Power) will provide the highest power levels that are appropriate for you. This mode is ideal for

treating both larger and smaller areas. Power Mode will give you the best hair removal results in fewer treatments, but

may be less comfortable.

Sensitive Mode G

Sensitive Mode is for those who find the Power Mode to be too intense. Sensitive Mode is a less powerful mode

available for those who are sensitive to discomfort but still desire to remove unwanted hair. With this mode you may

have to do a few more treatments to see desired results.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL8500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 2,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington IPL8500 Manual

Product: