719939
10
Zoom out
Zoom in
Previous page
1/196
Next page
10
Stretch Skin for Better Skin Contact – the contours of the skin may make it dicult for the skin contact sensors to
be fully depressed in certain areas. You may nd it easier to try and wrap your upper lip over your teeth or use your
tongue to stretch your cheeks for better skin contact.
POST TREATMENT CARE
After treatment, you may experience slight redness or a warm sensation on your skin. This is normal and will disap-
pear over time. To avoid irritation to your skin after a treatment, take the following precautions:
Avoid sun exposure for 24 hours after a treatment. Protect the skin with SPF 30 for 2 weeks after each treatment.
Do not prolong sun exposure such as sunbathing, using a tanning bed, or self-tan for at least 2 weeks after the last
treatment.
After treatment, keep the area clean and dry and drink plenty of water to keep skin hydrated.
Do not take hot baths, showers, or use steam rooms and saunas until any redness or skin sensitivity has returned to
normal.
Do not depilate (waxing, plucking, threading or creams) during the treatment – shaving is acceptable as long as you
avoid shaving 24 hours after each treatment.
Do not use bleaching creams or perfumed products for 24 hours after treatment.
300,000 FLASH BULB
This i-LIGHT product includes a spare bulb.
Each bulb will deliver 150,000 ashes during its lifetime, and is guaranteed to last for the entire guarantee period as
communicated on the guarantee card supplied with this product.
If you do need to replace the bulb, please refer to the separate step-by-step guide sheet. Additional bulbs are avail-
able from your local Remington service centre.
Signs that the bulb needs replacing:
Bulb Status Indicator is illuminated yellow: 150 Flashes remain in the bulb.
Bulb status indicator is ashing yellow: Bulb is empty.
CLEANING YOUR iLIGHT DEVICE
F CAUTION Before cleaning your i-LIGHT, make sure that the device is switched OFF and the power cord is
disconnected from the device.
Regular cleaning helps to ensure optimal results and a long life for the i-LIGHT device.
To clean the Flash Window, use only the lint-free cloth included with your i-LIGHT device. Take care not to scratch or
chip the Flash Window. Scratches and chips can reduce the eectiveness of the unit.
For stubborn stains on the ash window, dampen a cotton swab with surgical spirit or rubbing alcohol, apply to the
ash window and clean gently with the lint-free cloth provided.
F WARNING: If the Flash Window is cracked or broken, the unit must not be used. Never scratch the lter glass or the
metallic surface inside the Treatment Head.
F CAUTION: The i-LIGHT is a high voltage device. Never immerse in water. Never clean the unit or any of its parts
under a tap or in a dishwasher.
Storage
Switch o the unit, unplug and allow to cool for 10 minutes before storage.
TROUBLESHOOTING
Always read these instructions fully before using i-LIGHT.
Refer to this troubleshooting guide if you experience any problems with i-LIGHT, as this section addresses the most
common problems you could encounter with i-LIGHT. If you have followed the instructions in this section and con-
tinue to experience problems, please contact the Remington® Service Centre for further assistance.
ENGLISH
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6780 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info