Manual Remington IPL6780 (page 8 of 196) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719939

Zoom out

Zoom in

1/196

PREPARING FOR USE

CHECK YOUR SKIN TONE

• Consult the skin and hair chart at the front of this manual to ensure your skin is in the suitable range and your hair

colour is susceptible to treatment with i-LIGHT.

• Place the skin of your intended treatment area onto the skin sensor – ensure the skin is touching the sensor (Fig. 9).

• If your skin is suitable, you will hear a ‘beep’ and the i-LIGHT will switch on.

• If your skin is unsuitable, you will hear a ‘buzz’ and the i-LIGHT will remain switched o.

NOTE: You must use the skin sensor on each body part you wish to treat.

PREPARE YOUR SKIN FOR TREATMENT

• Ensure the area to be treated is clean and free from oils, deodorants, perfume, make up, lotions and creams. Shave

the hair from the area to be treated, and ensure the skin is clean and dry.

• For facial use, you may prefer to trim the hair. If trimming; the hair must be trimmed to less than 0.5mm.

• Never use wax, epilation, tweezers or other methods that remove the hair from the root as IPL is not eective if the

hair has been pulled out.

PREPARE THE i-LIGHT FOR USE

• Unwrap the hand piece cord from the i-LIGHT base and rest the hand piece back on the base unit.

• Ensure the power switch on the base unit is OFF.

• Connect the power cord to the i-LIGHT base unit at the power inlet.

• Connect the power cord to the wall outlet. Turn the power switch ON.

SELECTING THE ENERGY LEVEL

• The i-LIGHT is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest setting.

• TIP: For the most eective results, always use the highest energy level that does not cause discomfort on the skin.

• To determine the energy level being used, observe the number of lights illuminated on the Energy Level Display.

• Your i-LIGHT will automatically be set to Energy Level 1 each time the device is powered ON. To change the level,

press the Energy Level Selection Button.

TEST THE i-LIGHT ON YOUR SKIN

• Before your rst full treatment, test the i-LIGHT on a small patch of skin and wait 24 hours to ensure there are no

adverse reactions.

• Start at energy level 1.

• Place the i-LIGHT hand piece against your skin so the Flash Window is ush with the skin surface.

• Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated green.

• Press the Flash Button to deliver a ash.

• Mild to moderate discomfort is normal. If a ash delivered at Energy Level 1 feels tolerable, increase to Energy Level

2. Move the device to a dierent spot and ash the i-LIGHT one more time. Repeat this process until you nd the

setting that feels right for you.

• Wait 24 hours and then look at the test area. If the skin appears normal, proceed with your rst full treatment at the

energy level you determined is right for you.

• NOTE: You must test the device on each area of the face or body you wish to treat.

TREATMENT

CHANGING ATTACHMENTS

• Your i-LIGHT comes with two separate attachments for the face and body.

• The Body Attachment is specially designed for body hair and can ash every 3 seconds.

• The Facial Attachment is specially tuned for Female Facial Hair and minimises light leakage, it can ash every 4

seconds.

• The attachments are marked with dierent icons to identify them (Fig. 11).

To change attachments:

• WARNING: Always ensure the unit is OFF and the power cord is disconnected before removing the attachment.

• If the attachment is removed while the unit is powered ON, all indicator lights on the base unit will ash and audible

“beeps” will sound.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6780 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington IPL6780 Manual

Product: