719939
9
Zoom out
Zoom in
Previous page
1/196
Next page
9
ENGLISH
Allow the system to cool down for 5 minutes before attempting to change attachments.
Turn the Power Switch OFF and unplug the Power Cord from the electrical outlet.
Hold the attachment with one hand while pressing both Attachment Release Buttons with the other hand and pull
gently (Fig. 10).
Gently push the other attachment back into the Hand Piece making sure both side tabs click into place.
NOTE: the longer tab (with gold circuits) must be on top to properly t.
Store the unused attachment in a safe location (such as in the packaging) taking care not to damage the Flash
Window and other components.
The i-LIGHT is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode. Your i-LIGHT device
will automatically be set to Single Flash Mode each time the device is powered ON.
Single Flash Mode: The i-LIGHT will ash each time the Flash Button is pressed. This mode is ideal for precision treat-
ments of the face and small areas.
Multi-Flash Mode: The i-LIGHT device will ash when the Flash Button is pressed and will continue to ash every 3
seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows you to quickly treat large
areas by simply gliding the hand piece over the skin after each ash.
How to treat:
Place the Flash Window rmly against the skin - ensure the Skin Contact Sensors are fully engaged.
NOTE: When the Skin Contact Sensors are fully engaged you will hear a chirp’ and the Bulb Status Indicator Display
will illuminate green.
Press the ash button to deliver a ash. You should expect to see a bright ash of light (similar to a camera ash) and
you should feel a mild sensation of warmth.
Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
For Single-Flash Mode, press the Flash Button each time you move to the next area.
For Multi-Flash Mode, keep your nger on the Flash Button to keep it depressed and glide to the next area being
sure to keep the Skin Contact Sensors fully engaged. The next ash will be delivered automatically after 3 seconds.
NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact, simply resume treatment by
repeating the above steps.
Facial Treatment (female use only)
Facial hair can be very dierent to body hair and the skin on the face tends to be sensitive and more likely to be
exposed to the suns UV rays; therefore treating unwanted facial hair is dierent to treating the body – please be sure
to read the Warnings and Safety Precautions carefully before beginning a facial treatment.
IMPORTANT: The Facial Attachment has been specially designed to treat the unique characteristics of female facial
hair. DO NOT use the Body Attachment on the face. See section Changing Attachments’ for more information.
The Facial Attachment is only intended for use on female facial hair below the cheekbone (Fig. 2).
DO NOT use on male beards or facial hair as the results may be permanent or uneven which may produce changes in
facial hair characteristics which may not be desirable.
TREATMENT TIPS
Body Treatment
For best results, avoid overlapping ashes. This helps prevent exposure to more energy than is necessary to suppress
hair growth. It also ensures that you get the maximum use of the Bulb.
For the most eective results, always use the highest intensity operating mode that does not cause discomfort on
the skin. The level you use should feel warm on your skin, but should never cause discomfort.
You may notice that bony areas, such as elbows, shins and ankles, are more sensitive during treatment. This is normal
and should not be cause for alarm. To avoid this sensitivity, try stretching the skin away from the bony area during
treatment.
Facial Treatment
Test on a Patch of Skin – since facial skin tends to be more sensitive, make sure you test on a small patch before
proceeding. See section Test the i-LIGHT on your skin for more details.
Use a Mirror to Guide your Treatments – using a mirror for a good view of the area to be treated and to help ensure
you avoid treating the lips or any other dark spots. If the reected light is unpleasant, you may want to close your
eyes before each ash.
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
AE
HR
UA
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6780 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info