8431
27
Zoom out
Zoom in
Previous page
1/60
Next page
27
Parameter H factory set must not be changed
6.6.10 DHW control stop set point (I)
Adjustable from 00 - 30 °C factory default 20°C.
Refer to Par. 6.6.7.
6.6.11 DHW control option (J)
Three options 00 - 01 - 02 factory default 00.
This value sets the DHW control option.
00 Three way diverting valve (port A - HTG and Port B - DHW)
01 DHW pump
02 Inverted three way diverting valve (port B - HTG and Port A - DHW)
Parameter L not applicable
6.6.12 HTG cut in temp (N)
Adjustable 1) (-10) to 20 °C, factory default 03.
This value sets the t below actual return temp at the moment of control stop during
HTG demand.
A control stop occurs when the flow temp equals the flow temp set point + 5°C.
HTG cut in temperature = actual return temperature at the moment of control stop
(e.g. 60) - parameter N (3)
ie 60 - 3 = 57°C
If this takes longer than the maximum delay time (parameter U), the boiler will restart
(unless flow temperature exceeds flow temperature setpoint).
Parameter O not applicable
6.6.13 Boiler type (P)
Factory default 44 (Quinta 45) and 64 (Quinta 65), must not be changed.
Parameter T factory set must not be changed.
6.6.14 Maximum delay time (U)
Adjustable from 00 - 99 minutes, factory default 15 minutes (15).
This value sets the maximum off time following a control stop. The minimum off time
is preset to a fixed value (150 sec.).
A combination of both values is used to prevent hunting taking place.
6.6.15 Start and end point analog signal (Q and Y)
Start point (0 Volt): adjustable between 5) (-50)°C and +50°C, factory default
00°C.
This value sets the required flow temp at 0 Volt signal input (restricted by the min
flow set point).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta 45 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Quinta 45

Remeha Quinta 45 Manual - Dutch - 2 pages

Remeha Quinta 45 User Manual - Dutch - 76 pages

Remeha Quinta 45 User Manual - Dutch - 76 pages

Remeha Quinta 45 User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info