8431
25
Zoom out
Zoom in
Previous page
1/60
Next page
25
Table 09 Settings service level
*NOTE: see Par. 6.1.4 for values over two digits
6.6.1 Flow temperature set point during forced part load ($)
Adjustable from 20 to 90°C, factory default 80°C
This value will prevent the flow temperature exceeding this temperature during the
part load time.
6.6.2 High limit thermostat (%)
Adjustable from 90 to 110°C (!0), factory default 100°C ()0).
This value sets the high limit temperature at which the boiler will shut down in a lock
out condition requiring manual intervention.
Note: this parameter will have an effect on the minimum flow rate requirement, see
Par. 7.4.7.
6.6.3 Fan speed at full load HTG (^)
Adjustable from 18 to 100% output (= 1100 (Quinta 45) / 1200 (Quinta 65) to 5200
rpm), factory default 52 (100%). This value sets the maximum output of the boiler.
6.6.4 Fan speed at part load (HTG and DHW - &)
Adjustable from 18 to 100% output (= 1100/1200 to 5200 rpm), factory default 11
(Quinta 45) / 12 (Quinta 65) (18% output). This value sets the minimum output of
the boiler.
6.6.5 Starting point modulation (*)
Adjustable from 5 to 30°C, factory default 25°C.
This value sets the flow/return t point at which the control modulation begins. If the t
continues to rise, at 40°C the boiler will be at minimum output (parameter &), at 45°C
the boiler will shut off (code b#), see Par. 6.4).
The factory default should be correct for most installations. Changing this value should
only be carried out on advice from the service engineer.
NOTE: Installations with low flow problems would benefit by reducing this set point to
force modulation to begin sooner and minimise boiler off time.
T Intern May not be changed! 01
U Maximum delay time 0099 minutes 15
Q
Start point for 0 Volt analog
signal
5) (= -50) – 50 °C 00
Y End point for 10 Volt analog
signal
50(( (=299) °C )0 (=100)*
_ Intern 10
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta 45 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Quinta 45

Remeha Quinta 45 Manual - Dutch - 2 pages

Remeha Quinta 45 User Manual - Dutch - 76 pages

Remeha Quinta 45 User Manual - Dutch - 76 pages

Remeha Quinta 45 User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info