805754

Remeha E-HP AW 44 Cool Plus B Manual

30
Zoom out
Zoom in
Previous page
1/44
Next page
6 Installation
6.1 Preparation
6.1.1 Mounting the device
Important
The machine feet come standard with the machine. When it needs
to be installed on a frame, remove the feet and use the openings
for mounting the machine on the frame.
1Frame
1. Mount the device on the base or the frame.
2. Use bolts and nuts to fasten the device to the base or the frame.
See also
Transport, page 28
6.2 Hydraulic connections
6.2.1 Connecting the supply and return pipes.
Make sure to use flexible pipes or vibration absorbers to avoid the
transmission of vibrations to the pipework.
Caution
Use UV and bird pecking resistant insulation materials for
insulation that is in the open air.
Use condensate resistant insulation materials for a device with
active cooling.
Use a 4-way valve when the heat pump is used for cooling and
a low cooling flow temperature is required. This allows a reverse
flow over the heat exchanger.
1. Flush the device before connecting the heating pipes.
2. Install ball valves at the pipe connections 1 and 2 to facilitate
disconnecting the device for service.
3. Connect the heating supply pipe to the device at 1.
4. Connect the heating return pipe from the device at 2.
5. Measure if there is a sufficient flow over the condenser with the
appropriate equipment.
6. Install a flow switch, to prevent that the heat pump is operated without
water flow.
Caution
When there is no flow, switching on the heat pump will lead
to severe damage to the heat pump.
7. Install a filter and an air bleeder to prevent air or dirt entering the heat
exchanger.
8. Insulate the pipes
Fig.20 Mounting the device
AD-3001693-01
1
Fig.21 Connections
AD-3001696-01
1
2
6 Installation
30 7697291 - v.05 - 11032022
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha E-HP AW 44 Cool Plus B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha E-HP AW 44 Cool Plus B in the language / languages: English as an attachment in your email.

The manual is 12.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info