805754
28
Zoom out
Zoom in
Previous page
1/44
Next page
3. Insulate the heating pipes to avoid heat loss.
Make sure to use anti-condensation insulation in the case of a heat
pump with the Cool module.
The heat pump is protected against freezing by circulating the water
from the buffer tank when the heat pump is not running. If the heat
pump is switched off during winter or if there is a risk of a power
outage, take precautions to avoid the risk of freezing of the external
pipework and the plate heat exchanger in the device. Drain the device
or use a mix of water and anti-freeze in the pipework.
4. If necessary, install a condensate drainage.
This pipe does not have to be installed in the trench or cable tray with
the other cables and pipes.
See also
Connecting the condensate drain, page 31
5.3 Transport
Caution
Transport and move the appliance in the upright position at all
times to secure the correct working of the refrigerant and the
compressor.
Do not tilt the appliance. A maximum tilt of 15° is allowed, but
only for a short period of time.
Make sure the appliance is protected against shocks. Severe
shocks can damage the shock absorbers of the compressor.
Use the means of transportation suited for the weight of the
appliance.
Do not step under the hovering load.
Always use hoisting cables suited to carry the weight of the
appliance.
When storing the appliance, make sure the ambient
temperatures in the storage room are between -23 °C and 55
°C.
5.3.1 Forklift
Use a forklift to move the pallet with the device to its location.
Important
Make sure to use a forklift with long forks that protrude the edges
of the pallet or the floor-size of the machine. Keep the centre of
gravity in mind when moving the device to prevent unwanted
tipping.
1. Check on which side of the heat pump the lift side indication is placed.
2. Drive the forks under the unit from that side.
3. Secure the heat pump against falling down.
4. Carefully lift and move the device.
5. Carefully place the device at the desired location.
5.3.2 Crane
Use a crane to lift and move the device.
Important
Make sure to use a crane with a crane traverse, and a 4-point
crane cross head.
1. Attach the clamping strap to the frame of the device.
5 Before installation
28 7697291 - v.05 - 11032022
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha E-HP AW 44 Cool Plus B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha E-HP AW 44 Cool Plus B in the language / languages: English as an attachment in your email.

The manual is 12.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info