627783

Remeha Avanta Plus Timer Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
7
4 CONTROLS AND DISPLAY
Before the first commissioning/progamming a Reset must be
carried out:
• Ensure that the right sliding switch is in the RUN position.
• Press button „R“ with the point of a biro or similar imple-
ment. The Display will start to flash 0»00.
o
In relation to days of the week, the timer may be optionally
printed with: m..su or 1..7 and day or P
62432.LT.AL.REM.002
P 1...7 h
123
AUTO
OI
RUN P1 P2
4567
m
Set
R
76 8
9 10 12 131411
Keys Function
7 Sliding switch to set operating mode:
I: Permanently ON
AUTO: Switch ON and OFF in accordance with programmed switch times
O: Permanently OFF
8 Sliding switch to set Time and Switch Times:
RUN: Switch program and clock run
P1: Input switch times for Channel 1 (CH)
P2: Input switch times for Channel 2 (DHW)
9 P-Button for programming the 16 switch points.
When time switch points 1, 3, 5, 7, 9, 11, 13, 15, (activate time points) are selected, the lamp symbol ☼ will appear
in the right of the display.
If time switch points 2, 4, 6, 8, 10, 12, 14, 16 (switch OFF time points) are selected, there will be no symbol.
10 1...7: Button to input the day of the week (current day and switching day). When programming timing points and
individual days the following block day programmes are also possible:
1..5 (Monday to Friday)
1..6 (Monday to Saturday)
6..7 (Saturday to Sunday)
1..7 (Monday to Sunday)
11 h: Button to input hours (for current time and switching time)
12 m: Button to input minutes (for current time and switching time)
11+12 simultaneously pressing of buttons „h“ and „m“ for 2-3 seconds enables the time of day to be set.
13 -x-> Skip-Function: Pressing the Skip-button ‘-x->’ results in the fitted timer reverting to the opposite function
mode.
For example: If the timer is in „switched ON“ mode, it will be immediately switched off and vice-versa.
14 R: Reset button will delete all switching times and current time of day
table 03 Control panel
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Avanta Plus Timer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Avanta Plus Timer in the language / languages: English, German as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info