627783

Remeha Avanta Plus Timer Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
8
2-Channel time clock
4.1 Setting Operation Modes
Operation Mode Position of the sliding switch
Permanently ON
The appliance(s)
connected is/are
permanently
switched ON
• Set the left sliding switch to position 1.
• Choice of Channel is effected using the Skip button „X->“.
Set Channel:
Channel 1 (CH): press once
Channel 2 (DHW): press twice
Channel 1 and 2: First select Channel 1 or 2. Then press the Skip button again to select the second
Channel.
The selected Channel number(s) show in the display.
The lamp symbol ☼ appears as soon as at least one Channel has been selected.
• To delete a selected Channel set the left sliding switch for 2-3 seconds to AUTO and then back to I.
The permanently ON Channel can be selected again.
Permanently OFF
The appliance(s)
connected is/are
permanently
switched OFF
• Set the left sliding switch to position O.
• Choice of Channel is effected using the Skip button „-X->“.
Set channel:
Channel 1 (CH): press once
Channel 2 (DHW): press twice
Channel 1 and 2: First select Channel 1 or 2. Then press the Skip button again to
select the second Channel.
The selected Channel number(s) show in the display.
• No ☼ symbol.
• To delete a selected Channel set the left sliding switch for 2-3 seconds to AUTO and then back to 0.
The permanently OFF Channel can be selected again.
AUTO
The appliance(s)
connected switch
according to a pre-
set programme
• Set the left sliding switch to position AUTO.
• No Channel selection is possible in this setting – both Channels switch according to how they have
been programmed.
• ON mode: symbol ☼ and the relevant Channel number(s) show up in the Display.
• OFF mode: symbol ☼ disappears.
table 04 Setting modes
4.1.1 Setting the Time and Day
Proceed as follows:
• Set the right sliding switch to position RUN and next press
buttons „h“ and „m“ simultaneously for 2 to 3 seconds (Set
function).
• Press button „1...7“ to input the day of the week (1 = Mon-
day, 7 = Sunday). An arrow will be seen in the Display
indicating the day of the week.
• Use buttons „h“ and „m“ to set the time.
• After 15 seconds the times will automatically pick up the
time of day. (The colon in the Display will start to flash.)
Or set the right sliding switch briefly to P1 or P2 and then
back to RUN. The time of day will be activated immediately.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Avanta Plus Timer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Avanta Plus Timer in the language / languages: English, German as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info