559716

Reebok 8100 ES TREADMILL Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
17
HOW TO USE A WEIGHT LOSS WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
1
3.
2. Enter your weight.
Press the weight increase and decrease buttons
located below the distance display. When your
weight is displayed, press the Start button. Your
weight will be saved in memory. Note: Always
enter your weight before using a weight loss
workout.
3. Select a weight loss workout.
To select one of the six weight loss workouts,
press the Weight Loss button repeatedly until the
name of the desired workout appears in the matrix.
When a weight loss workout is selected, the Incline
display will show the maximum incline setting of
the workout and the Speed display will show the
maximum speed setting. The Time display will
show how long the workout will last. After a few
seconds, the matrix will show the profile of the
workout.
4. Press the Start button or the Speed increase
button to start the workout.
A moment after you press the button, the treadmill
will automatically adjust to the first speed and in-
cline settings of the workout. Hold the handrails
and begin walking.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout. The height of the flashing
segment indicates the speed setting for the current
segment. At the end of each segment, a series of
t
ones will sound and the next segment of the pro-
file will begin to flash. If a different speed or incline
s
etting is programmed for the next segment, the
speed or incline setting will flash in the display to
alert you.
The workout will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If the speed or incline setting for the current seg-
ment is too high or too low, you can manually over-
ride the setting by pressing the Speed and Incline
buttons. Note: When the current segment of the
workout ends, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for that segment.
5. Follow your progress with the matrix and the
displays.
See step 5 on pages 14 and 15.
6. Measure your heart rate if desired.
See step 6 on page 15.
7. When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
Current Segment
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reebok 8100 ES TREADMILL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reebok 8100 ES TREADMILL in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info