659424
12
Zoom out
Zoom in
Previous page
1/200
Next page
12
Program Recommendations for use
Cooking time,
set by default
Time adjustment range/
setting interval
Time Delay
Preheating stage
Keep Warm
BREAD Baking white and wheat-rye breads including the proong cycle 3 hours 1 hour 6 hours / 10 min +
DESSERT Making desserts using fresh fruits and berries 1 hour 5 min – 4 hours / 5 min + +
QUICK
COOK
Quick cooking rice and other grains 30 min +
VII. BEFORE CALLING FOR SERVICE
Error code Error description Error handling
Е1 – E3
System error; system board or heating ele-
ment malfunction.
Unplug the unit and let it cool down. Close the lid tightly. Switch the unit back on.
If this does not eliminate the error, address an authorized service center.
Problem Possible cause Solving the problem
The device does not switch on. Voltage supply failure.
Check the voltage supply.
The meal is taking too long to cook.
Voltage supply interruption.
There is a foreign object between the bowl and the heating element.
Remove the foreign object.
The bowl was installed with a distortion. Install the bowl evenly, without any distortion.
The heating element is dirty.
Unplug the device and let it cool down. Clean
the heating element.
VIII. PRODUCT WARRANTY
We warrant this product to be free from defects for a period of 2 years from the date of purchase. If the appliance
fails to operate properly within the warranty period and is found to be defective in material or workmanship, we will
repair or replace it free of charge. This warranty comes into force only in case an original warranty service coupon
with a serial article number and an accurate impress of the company of the seller proves the purchase date. This
limited warranty does not cover damage caused by the failure to use this product for its normal purpose or in ac-
cordance with the instructions on the proper use and maintenance of the product or any kind of repair works. Do
not try to disassemble the device and keep all package contents. This warranty does not cover normal wear of the
device and its parts (lters, bulbs, ceramic and Teon coating, gaskets etc.).
Service life and the applicable product warranty period start on the date of purchase or the date of manufacture (if
the purchase date cannot be established).
You can determine manufacture date by serial number, located on the identication label on the housing of the
device. The serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month, 8th digit
the year of manufacture.
Service life of the product, established by the manufacturer is 5 years from the date of purchase, provided that the
unit is used and maintained in accordance with the user manual and applicable technical standards.
The packaging, user manual, and the device itself may not be treated as household waste. Instead, it shall be taken to
the applicable collection point for the recycling of electrical and electronic equipment.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RMC-M90E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RMC-M90E in the language / languages: All languages as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info