672968
46
Zoom out
Zoom in
Previous page
1/60
Next page
34
ST60 Tridata Instrument Owners Handbook
Leaving User calibration
Hold down the depth and speed keys for 2 seconds, to save your
settings, exit User calibration and resume normal operation.
4.3 Intermediate calibration
Intermediate calibration enables you to:
Check the instrument software version.
Check the instrument status - either YES (master)) or NO (repeater).
You can also change the depth status, as required. This feature is
particularly useful in preventing interference when using another
product (e.g. a fishfinder) that operates at 200 kHz.
Carry out a calibration run over a measured distance to ensure
accurate speed readings.
To start Intermediate calibration, hold down the depth and speed
keys for approximately 4 seconds (see Intermediate calibration flow
chart).
To set the instrument status:
1. Press the depth key to select the Instrument status screen.
2. Press the trip and reset keys simultaneously to enter the depth
adjust mode, then press either trip or reset to set the required
status, i.e. either YES (for master operation) or NO (for repeater
operation).
Note: You must not allocate more than one master depth instrument in
any system.
3. Press the trip and reset keys simultaneously again, to leave the
adjust mode.
040_3c04.p65 06/04/01, 10:2134
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine ST60 Tridata Instrument at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine ST60 Tridata Instrument in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine ST60 Tridata Instrument

Raymarine ST60 Tridata Instrument User Manual - German - 66 pages

Raymarine ST60 Tridata Instrument User Manual - Dutch - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info