Manual Raymarine ST60 Tridata Instrument (page 48 of 60) (English)

672968

Zoom out

Zoom in

1/60

ST60 Tridata Instrument Owner’s Handbook

Note: It is recommended that the speed calibration procedure is

carried out in conditions of minimum tidal drift.

To carry out a speed calibration, start the Intermediate calibration

procedure and use the speed key to proceed to the Calibration run

length screen (see sheet 1 of the Speed calibration flow chart). Proceed

with the speed calibration as follows:

1. With the Calibration Run Length screen displayed, press the trip

and reset keys together to enter adjust mode. In this mode, the

displayed run length flashes on and off.

2. Set the length of the intended calibration run, using either the trip

key to decrement or the reset key to increment the run length

value. You can set any value between 0.25 and 2.50.

3. Press trip and reset keys together to commence the speed

calibration. The Cal status screen is displayed. The text at the

bottom of the screen alternates between Strt 1 and the calibration

factor (CF) currently applied.

4. Start first outward leg of the calibration run and as you pass the

start point, press the speed key, so that the text out shows at the

bottom of the screen. As the calibration run proceeds, the

displayed value will increment.

5. At the end of the measured distance on the outward leg, press the

speed key again so that:

• The text rEtrn is flashing at the bottom of the screen.

• The displayed distance freezes. Note that this value will not be

the same as the measured distance due to errors introduced by

tidal flow.

6. Turn the vessel round, start the return leg and as you do so, press

the speed key so the rEtrn legend stops flashing and the displayed

value increments.

7. At the end of the return leg, press the speed key to end the

calibration run. At this point:

• The text Strt 2 alternating with the new calibration factor is

displayed at the bottom of the screen.

• The displayed distance freezes. This value should be very close

to the actual (measured) distance of the calibration run.

8. Press the depth and speed keys together, to store the new

calibration factor.

040_3c04.p65 06/04/01, 10:2136

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine ST60 Tridata Instrument in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine ST60 Tridata Instrument

Raymarine ST60 Tridata Instrument User Manual - German - 66 pages

Raymarine ST60 Tridata Instrument User Manual - Dutch - 66 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Raymarine ST60 Tridata Instrument Manual

Product: