467351
37
Zoom out
Zoom in
Previous page
1/46
Next page
3.5.4 2
nd
Intermediate Frequency Circuit
The 1
st
IF signal is added to IC3 and converted to 2
nd
IF signal. The 2
nd
IF signal goes
through F2 and amplified in the IC3 and then through discriminator CD1 and the
demodulated AF signal is output from IC3.
3.5.5 Low Frequency Circuit
The AF signal demodulated in the IC3 goes through the de-emphasis circuit consisting of
operational amplifier IC4(A) and R127 and C45. A 3 stage active HPF consisting of
IC4(B) ,C48,C49 C50,R23,R24 and R25 is used to reject AF signal below 300Hz. The AF
signal from the 3-stage HPF goes through AF Volume VR301 and is input to the speaker
amplifier circuit IC9.
3.5.6 Audio Muting Circuit
The Q18 to mute the audio is controlled by input of squelch’s BUSY signal and the
mute output of the CPU(IC201).
3.5.7 WX Alert Detection
The tone selector IC10 detects the 1050Hz alert tine if it is contained in the
re-modulated AF and WX alert tone will be output from the speaker.
3.5.8 DSC Signal Treatment
If the re-modulated signal arriving is a DSC signal, it is input to MODEM IC(IC11) as an RX
MODEM signal, and converted to digital signal. Undergoing the treatment in the CPU circuit,
this digital signal changes the operation state to DSC mode.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Ray 53 VHF Radio with DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Ray 53 VHF Radio with DSC in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info