467351
38
Zoom out
Zoom in
Previous page
1/46
Next page
4. ALIGNMENT for RAY53
4.1 PLL Adjustment(Receiver)
1.1 Connect the power supply(13.6V, 10) to the power line.
1.2 Set the radio on CH16(156.800MHz) and set it to Receiver mode.
1.3 Connect the reed terminal of a digital voltmeter or high impedance tester to Test
point(TP2) on RF PCB and set it to DC voltage range.
1.4 Adjust variable coil (T1) in the RF PCB(in the VCO shield case) and set the DC voltage
to 1.3V+/-0.1V.
4.2 PLL Adjustment(Transmitter)
Connect the power supply (13.6V,10A) to the power line.
Connect RF Power Meter(40W 50 ohm, 150-200MHz) to antenna connector.
Set the radio on CH16(156.800MHz) and set it to Transmitter mode.
Connect the reed terminal of a digital voltmeter or high impedance tester to Test point(TP3)
on RF PCB and set it to DC voltage range.
Adjust variable coil (T2) in the RF PCB(in the VCO shield case) and set the DC voltage to
2.0V+/-0.1V.
4.3. Frequency Adjustment(Transmitter)
4.3.1 Connect the power supply (13.6V,10A) to the power line.
4.3.2 Connect RF Power Meter(40W 50 ohm, 150-200MHz) to antenna connector.
Use Coupler in order to divide the transmitter output power and then connect to
frequency counter.
4.3.3 Set the radio on CH16(156.800MHz) and set it to Transmitter mode.
4.3.4 Adjust Trimmer Capacitor(TC1) in the RF PCB(in the VCO shield case) and set the
Frequency Counter to 156800.000Hz+/-100Hz.
4.4 Modulation Adjustment(Transmitter)
4.4.1 Connect the power supply (13.6V,10A) to the power line.
4.4.2 Connect RF Power Meter(40W 50 ohm, 150-200MHz) to antenna connector. Use
Coupler in order to divide the transmitter output power and then connects to FM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Ray 53 VHF Radio with DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Ray 53 VHF Radio with DSC in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info