661002
75
Zoom out
Zoom in
Previous page
1/198
Next page
en-73
9 ADJUSTMENTS
9.3 CUTTING UNIT HEIGHT OF CUT ADJUSTMENT___________________________
TO ADJUST SPANNER TYPE:
1. Release the locknut under adjuster (A) on both sides
of cutting unit.
2. Turn adjuster (A) at the rear of the unit clockwise to
reduce the height of cut, or anticlockwise to increase
the height of cut alternately. The grooves (B) are
used as an rough indicator for setting the roll parallel.
3. After adjusting secure by tightening locknut on both
sides of cutting unit.
9.4 FLOATING HEAD FRONT ROLL SETTING _______________________________
1. The right hand end of the front roll is fixed. To set the
roll parallel to the bottom blade rotation of an
eccentric clamping nut (A) on the left hand front roll
bearing housing is necessary.
2. Slacken left hand roll bearing housing clamping bolts
(B).
3. Rotate the eccentric nut (A) to give the desired
parallelism of the roll to the bottom blade.
4. While still holding the eccentric nut (A) from rotating
tighten the roll bearing housing clamping bolts (B).
A
B
A
B
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Highway 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Highway 3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 27,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info