661002

Ransomes Highway 3 Manual

74
Zoom out
Zoom in
Previous page
1/198
Next page
en-72
9 ADJUSTMENTS
A
B
C
D
9.1 TRACTION CONTROL PEDAL ________________________________________
The LPV transmission pump has an internal neutralising
mechanism which cannot be adjusted. If the machine does
however creep carry out the following.
1. Lift and support both front and rear wheels.
2. Remove ball joint from pump lever to allow pump to
neutralise.
3. Start engine, manually move the pump control lever
and release to ensure wheels stop rotating.
4. Operate foot pedal to ensure cable is free.
5. Reattach ball joint to pump lever.
6. Move the foot pedal in forward & reverse directions to ensure there is no creep in neutral position.
9.2 WEIGHT TRANSFER ADJUSTMENT ___________________________________
The weight transfer bias can be adjusted on the lift valve.
The valve is accessible from under the mower on the left
hand side behind the front axle. The centre unit will have to
be swung out of the way.
To a dju st :
1. Loosen the locknut A whilst holding the threaded
shaft still with the Allen Key B.
2. Using an Allen key B rotate the threaded shaft
clockwise in direction D to increase weight onto the
drive wheels when the traction control button is
operated on the control pod. This improves slope
climbing performance. To reduce weight on the drive
wheels when the traction control button is operated
on the control pod, rotate the threaded shaft counter
clockwise in direction C. This increases the ground weight of the cutting unit and will reduce the possibility
of cutting unit “bounce” when working at high speed on undulating ground. It is recommended that the
Allen key is turned a 1/4 turn at a time and the weight transfer tested.
3. Tighten locknut A. whilst holding the threaded shaft still with the Allen Key B.
WARNING
Properly Support Raised Machinery With Jack
Stands
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Highway 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Highway 3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 27,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info