661002

Ransomes Highway 3 Manual

73
Zoom out
Zoom in
Previous page
1/198
Next page
SAFETY, OPERATORS & MAINTENANCE MANUAL
en-71
8 MAINTENANCE &
LUBRICATION
HYDRAULIC MOTOR DRIVE SHAFT
Lower all cutting units onto level ground. Before leaving the driving position, stop the engine and make sure all
moving parts are stationary. Apply brakes and disengage all drives. remove the starter key. The direct drive
hydraulic motor can be removed from the cutting unit by removing the two screws and washers holding the motor
to the bearing housing. Carefully withdraw the motor from the bearing housing, it is important not to contaminate
the motor shaft or internal splines of the cutting reel. If for any reason they are contaminated, they should be
cleaned by degreasing. Liberally lubricate the motor and reel splines with Shell Malleus JB1 grease (Textron Part
no. MBE3927) before reassembling.
REMOVAL OF HYDRAULIC MOTOR
To remove the hydraulic motor, remove the two screws and washers holding the motor to the bearing housing.
Carefully withdraw the motor together with the cardan shaft.
NOTE:When dismantling it is important not to contaminate the cardan shaft or the internal splines of the
hydraulic motor and cutting reel shaft. If for any reason they should become contaminated, they should be
cleaned by degreasing and then lubricated using Shell Malleus JB1 grease before reassembling.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Highway 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Highway 3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 27,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info