490215
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
FINE TUNING OF MIDRANGE/TWEETER LEVEL
a The tweeter level can be set to three different attenuation levels, to compensate for
different mounting locations of the tweeters and - of course - to suit personal taste.
s Slide back the transparent cover of the crossover unit and set the preferred
attenuation level by adjusting the jumper on the circuit board.
d The same procedure can be applied to the midrange level, where two different
attenuations can be selected. The 0dB level is the default setting, providing linear
response of your system. The -3dB setting is for less midrange output, if applicable!
g Caution: Both tweeter and midrange attenuation jumpers must be set to identical
positions! The tweeter and midrange levels are set best, after the installation is
complete with all the additional components you intend to install, like subwoofer,
amplifier(s) etc. The tweeter level balance should be entirely played by ear. For this
final adjustment, make sure the following steps have been carried out:
z Highpass and lowpass frequency adjustment settings of the electronic
crossovers
z Input gain level adjustment of satellite- and subwoofer channels (if applicable)
z Tone controls - including the loudness function - set to neutral / zero position.
Fig.: Jumperposition
Fig.: Flush Mounting
RA163.3 Manual 16.07.2002 18:38 Uhr Seite 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radical Audio RA163.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radical Audio RA163.3 in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info