490215

Radical Audio RA163.3 Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
TWEETER INSTALLATION
The tweeter units come with two different mounting adaptors, suitable for flat surface of
flush mounting. After you have checked which tweeter location in your vehicle offers best
staging and smooth midrange reproduction, you can finally install the tweeters:
FLAT SURFACE MOUNTING
a Using the flat bayonet lock base as a template, mark the two screw holes and drill
them by using a 3 mm drill bit. Secondly, mark and drill the 6 mm hole for the tweeter
lead wire to get through the panel.
s Mount the flat tweeter adapter base to the panel using the two self-tapping screws
provided with the mounting hardware set.
d Run the speaker wire included in the speaker wire kit from the crossover to the flat
adapter base. Connect the tweeter main wire to the wire extension coming from the
crossover.
f Mount the main tweeter unit to the flat base by inserting the tweeter into the conical
mounting ring. Place this unit over the adaptor base, turning the tweeter clockwise.
This locks the tweeter unit in place.
FLUSH MOUNTING
a Remove the panel you are going to install the tweeter, to check for proper clearance
behind it. The flush mount kit is 16 mm deep, so make sure there are no obstructions
behind the spot you choose.
s Mark the centre of the spot and cut a hole with a diameter of 40 mm, for example
using a hole-saw attachment for your power drill.
d Mount the spring bar to the flat bayonet lock base with the M4 metrical screw
included in the hardware set.
f Assemble the tweeter by inserting the main unit from the backside to the flush mount
cup. Insert this unit into the hole you have cut, then lock the spring/flat base with the
tweeter unit by turning the flush mount cup clockwise.
g Connect the speaker wire extension to the main leads.
h Remount the doorpanel, window triangle etc.
j You can now pinpoint the tweeter to the desired direction.
8
Fig.: Flat Surface Mounting
RA163.3 Manual 16.07.2002 18:38 Uhr Seite 8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radical Audio RA163.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radical Audio RA163.3 in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info