Manual Radical Audio RA163.3 (page 7 of 24) (English, German)

490215

Zoom out

Zoom in

1/24

d Hold the RA50.3M midrange speaker into the mounting hole and mark the four moun-

ting holes for the screws with a water proof Edding marker or a pencil.

f Drill the holes with a power drill, using a 3 mm drill bit. Attach the midrange speaker

wires to the RA50.3M speaker unit. Hold the speaker in place and fix it with the provi-

ded four self tapping screws contained in the mounting hardware kit.

g Now fix the metal grille to the mounting rim. Done!

CROSSOVER WIRING

a Wire the crossover unit as shown in the schematic diagram shown overleaf. Be sure to

maintain speaker polarity at the input/output terminals of the crossover!

s The transparent cover of the x-over housing can be pushed back to gain access to the

screw mounting holes and the jumpers for tweeter/midrange attenuation inside the

housing. For midrange and tweeter level adjustments, see chapter "FINE TUNING OF

MIDRANGE/ TWEETER LEVELS", page 19.

d Fix the crossover in place with the provided self-tapping screws - avoiding the exposure

of the crossovers to water, excess humidity or other fluids.

f When you have determined the best tweeter locations, the tweeter level can be

attenuated by a jumper located inside the crossover housing. Therefore the crossovers

must remain accessible!

Fig.: Crossover Wiring

RA163.3 Manual 16.07.2002 18:38 Uhr Seite 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Radical Audio RA163.3 in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Radical Audio RA163.3 Manual

Product: