Manual Quickie Xenon 2 FF (page 30 of 92) (English, Dutch, French)

713880

Zoom out

Zoom in

1/92

ENGLISH

XENON 2 FF 30 Rev.4.0

6.15 Pelvic Restraint Belt

WARNINGS!

• Before using the wheelchair make sure that the pelvic

restraint belt is fitted.

• The pelvic restraint belt must be checked on a daily

basis to ensure it is free from any obstruction or

adverse wear.

• Always make sure that the pelvic restraint belt is

correctly secured and adjusted prior to use.

DANGER!

If the strap is too loose, this could cause the user of the

wheelchair to slip down and risk suffocation or serious

injury.

The pelvic restraint belt is fitted to the wheelchair as

shown in Fig.6.15.1 to Fig.6.15.10. The seat belt

comprises two halves. They are fitted using the existing

seat stay retaining bolt fitted through the eyelet on the

belt. The belt is routed under the rear of the side panel.

(Fig.6.15.1).

Adjust the pelvic restraint belt to suit the user’s needs as

follows:

Adjust the belt position so buckles are in the centre of the

seat. (Fig.6.15.2).

Feed free belt back through male buckle and slide

adjusters.

Ensure belt is not looped at male buckle, (Fig.6.15.3).

Feed free belt through slide adjusters and male buckle to

provide more belt length, (Fig.6.15.4 to Fig.6.15.6).

Fig.6.15.1

Fig.6.15.2

Fig.6.15.4

Fig.6.15.5

Fig.6.15.3

Fig.6.15.6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Xenon 2 FF in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Xenon 2 FF Manual

Product: