Manual Quickie Xenon 2 FF (page 32 of 92) (English, Dutch, French)

713880

Zoom out

Zoom in

1/92

ENGLISH

XENON 2 FF 32 Rev.4.0

Hand-Bike-Axle

It is necessary to adjust the hand-bike axle to bias the

centre of gravity rearwards. This allows safe use of a

hand-bike accessory, (Fig.6.16.1).

DANGER!

• Using a hand-bike without the hand-bike axle makes the

wheelchair unstable and can lead to serious injury of the

user and other people.

• Only use add-on devices approved for the use in combi-

nation with your wheelchair.

Fig.6.16.1

6.16 Hand-Bike Axle

Hand-Bike Reinforcement Kit

To assemble the hand-bike reinforcement kit:

• Insert the nipple at one end of the cable into the

receptor at the front of the frame, (Fig.6.16.2).

• Insert the nipple at the other end of the cable into the

receptor at the rear of the frame, (Fig.6.16.3).

• Insert the tensioner tool, (A), into the cable receptor at

the rear of the frame, (Fig.6.16.4).

• Move the tensioner tool, (A), upwards until the receptor

and the front tube, (B), just starts to move towards the

rear, (Fig.6.16.5).

• Hold the cable under tension with the tensioner tool

and tighten the screw on the rear cable receptor,

(Fig.6.16.5).

• Repeat the process for the other side.

WARNING!

The tension of both cables must be checked for

tightness before and after each use of the hand-bike.

Fig.6.16.2

Fig.6.16.3

Fig.6.16.4

Fig.6.16.5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Xenon 2 FF in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Xenon 2 FF Manual

Product: