815519
24
Zoom out
Zoom in
Previous page
1/34
Next page
24 7095-803R 12/23
Figure 24.1
Tube
Channel
Assembly
2 Tube
Channel Nuts 2 Tube
Channel Bolts
Ceramic
Blanket
Baffle
Protection Channel
2 Baffle
Boards
1
2
4
3
Rotate and
remove from
firebox
H. Tube Channel
Service Part: SRV7095-016
Removing Tube Channel Assembly
1. Remove the 3 right side bricks.
2. Remove the ba󰀪e protection channel by bending back
the tabs using needle nose pliers located at the right and
left side of the protection cover. Lift the cover up slightly
and pull toward the front and out of the rebox (Figure
24.2).
3. Locate the 2 channel nuts and 2 bolts inside of chamber
and remove using a 7/16 socket wrench for the nuts and
a 3/8 socket wrench for the bolts (Figure 24.3).
NOTE: Soak the bolts with penetrating oil for at least 15
minutes before trying to remove them.
4. Slide the tube channel assembly all the way to left until
it is o󰀨 the threads. Drop the right side down, then slide
the assembly back to right (Figure 24.1).
5. The ceramic blanket and both ba󰀪e boards can be
removed at the same time you remove the tube channel
assembly.
6. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
ba󰀪es out through the front opening.
7. Re-install in reverse order.
Baffle Protection
Channel
Bend Back Tabs
Figure 24.2
Use 7/16 Socket Wrench
and Remove Channel Nuts
Figure 24.3
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Expedition II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Expedition II in the language / languages: English as an attachment in your email.

The manual is 6.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Expedition II

Quadra-Fire Expedition II User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info