815519
22
Zoom out
Zoom in
Previous page
1/34
Next page
22 7095-803R 12/23
C. Blower
Service Part: SRV7000-868
1. Ensure that the re is out and the appliance is cool to
the touch.
2. Remove the door by lifting the door up and o󰀨 of the hinges;
set aside (Figure 22.1).
3. Remove the fascia by lifting up and o󰀨 of the appliance;
set aside (Figure 22.1).
4. Disconnect the wires from the blower (Figure 22.2).
5. Remove the 2 screws from the hold down bracket and pull
the blower and bracket forward.
6. Remove the blower from the hold down bracket.
7. Re-install in reverse order. Be certain that the hold down
bracket’s screws are completely seated in the grommets.
Insert the locating tab in the hold down bracket into the
placement slot.
Figure 22.2
D. Snap Disc
Service Part: SRV230-0470
1. Ensure that the re is out and the appliance is cool to
the touch.
2. Remove the door by lifting the door up and o󰀨 of
the hinges; set aside (Figure 22.1).
3. Remove the fascia by lifting up and o󰀨 of the appliance;
set aside (Figure 22.1)
4. Remove snap disc box from lower left.
5. Using a Phillips head screw driver, remove the 2 screws
from the snap disc and lift the snap disc o󰀨 of the
mounting bracket (Figure 22.3).
6. Disconnect the wires and replace with new snap disc
and re-connect the wires.
7. Place snap disc box back in position and reassemble
fascia and door.
Figure 22.3
Figure 22.1
Shock Risk.
Do NOT remove grounding prong
from plug.
Plug directly into properly grounded 3
prong receptacle.
Route cord away from appliance.
Do NOT route cord under or in front
of appliance.
CAUTION
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Expedition II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Expedition II in the language / languages: English as an attachment in your email.

The manual is 6.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Expedition II

Quadra-Fire Expedition II User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info