815519
12
Zoom out
Zoom in
Previous page
1/34
Next page
12 7095-803R 12/23
Processed Solid Fuel Fire Logs
NOT permitted for use in this appliance
Moisture
NOTICE: Seasoning time may vary depending on
drying conditions.
HARDWOODS SOFTWOODS
Alder Aspen
Apple Cedar
Birch Douglas Fir
Maple Pine
Oak Spruce
Poplar
Table 12.1
The majority of the problems appliance owners experience
are caused by trying to burn wet, unseasoned wood.
Wet, unseasoned wood requires energy to evaporate
the water instead of heating your home, and
Causes evaporating moisture which cools your chimney,
accelerating formation of creosote.
Seasoned Wood
Cut logs to size
Split to 6 inches (152 mm) or less in diameter
Air dry to a moisture content of not more than 20%
- Softwood - about nine months to dry
- Hardwood - about eighteen months to dry
Fire Risk.
Do NOT burn wet or green wood.
Store wood in dry location.
Stack wood so both ends are exposed
to air.
Wet, unseasoned wood can cause
accumulation of creosote.
WARNING
Storing Wood
Steps to ensure properly seasoned wood:
Stack wood to allow air to circulate freely around and
through woodpile.
Elevate wood pile o󰀨 ground to allow air
circulation underneath.
Smaller pieces of wood dry faster. Any piece over 6 in.
(152 mm) in diameter should be split.
Wood (whole or split) should be stacked so both ends
of each piece are exposed to air. More drying occurs
through the cut ends than the sides.
Store wood under cover to prevent water absorption
from rain or snow. Avoid covering the sides and
ends completely.
Fire Risk
Do NOT store wood:
In front of the appliance.
In space required for loading or
ash removal.
WARNING
J. Building A Fire
Before lighting your rst re in the appliance:
NOTE: The special high temperature paint that your
appliance is nished with will cure as your appliance
heats. You will notice an odor and perhaps see some
vapor rise from the appliance surface; this is normal.
We recommend that you open a window until the odor
dissipates and paint is cured.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Expedition II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Expedition II in the language / languages: English as an attachment in your email.

The manual is 6.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Expedition II

Quadra-Fire Expedition II User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info