815519
11
Zoom out
Zoom in
Previous page
1/34
Next page
11 7095-803R 12/23
Figure 11.1
ACC Start-up Air
Control
To activate:
Push back until it stops and then pull forward until it stops
Air quality is important to all of us, and if we choose to use
wood to heat our homes we should do so responsibly. To do
this we need to learn to burn our appliances in the cleanest
way possible. Doing this will allow us to continue using our
wood appliances for many years to come.
G. Automatic Combustion Control (ACC)
When using the Automatic Combustion Control (ACC)
system, you do not have to continually monitor the re.
Once you set the ACC system it will control the re for you.
Follow the instructions below to learn how to operate your
stove with ease.
H. Burn Rates and Operating E󰀩ciency
For maximum operating e󰀩ciency
Burn dry, well-seasoned wood.
Follow these burn rate instructions below.
Burn Rate
1. Starting a Fire:
- Load appliance with wood and start re (reference
Quick Start Guide on page 6).
- Activate start-up air control.
2. Reloading:
- Add wood as needed.
- Activate start-up air control.
This wood appliance has a manufacturer-
set minimum low burn rate that must not be
altered. It is against federal regulations to
alter this setting or otherwise operate this
pellet insert in a manner inconsistent with
operating instructions in this manual.
WARNING
NOTE: If using the blower should be o󰀨 for the rst 30
minutes and then be operated in the desired setting at
30 minutes.
3. Adjusting the Burn Rate:
The Expedition-II Insert is designed to optimize
e󰀩ciency at all times. Since there are no user controls
to adjust the burn rate, the easiest method is to learn
how many logs you need at a time for the amount of
heat desired. In addition to the amount of wood and
the size of the logs, take the time to experiment with
split and unsplit logs as split logs will burn faster than
unsplit logs.
I. Wood Fuel
Hardwood vs Softwood
Your appliance performance depends on the quality of the
rewood you use.
Seasoned wood contains about 8,000 BTUs per pound.
Hard woods are more dense than soft woods.
Hard woods contain 60% more BTUs than soft woods.
Hard woods require more time to season, burn slower
and are harder to ignite.
Soft woods require less time to dry, burn faster and are
easier to ignite.
Start the re with softwood to bring the appliance up to
operating temperature and to establish draft.
Add hardwood for slow, even heat and longer burn time.
Fire Risk.
DO NOT BURN GARBAGE OR
FLAMMABLE FLUIDS SUCH AS
GASOLINE, NAPHTHA OR ENGINE OIL.
Do NOT burn treated wood or wood with
salt (driftwood).
May generate carbon monoxide if burn
material other than wood.
May result in illness or possible death.
WARNING
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Expedition II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Expedition II in the language / languages: English as an attachment in your email.

The manual is 6.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Expedition II

Quadra-Fire Expedition II User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info