815519
14
Zoom out
Zoom in
Previous page
1/34
Next page
14 7095-803R 12/23
AUTO
MANUAL
MANUAL: Overrides
the internal snap disc
AUTO: Fan will turn
ON/OFF automatically
and is controlled by the
internal snap disc
MANUAL: Overrides
the internal snap disc
AUTO: Fan will turn
ON/OFF automatically
and is controlled by the
internal snap disc
Figure 14.1
NOTICE: Do NOT operate a circulating fan within close
proximity, approximately 4 ft (1.2m), of appliance. Can
reverse air ow, blowing hot air into appliance cavity. Can
damage appliance blower due to overheating.
K. Blower Control Box with Snap Disc
1. The blower will turn on/o󰀨 automatically when set to
AUTO (Figure 14.1).
2. When set to MANUAL, the fan will turn on/o󰀨 only when
you turn it on or o󰀨. This setting over-rides the internal
snap disc.
3. Adjust the speed of the fan by turning the HIGH/LOW
knob to the desired setting.
L. Blower Operation
1. Initial (cold) startup:
Push the Start-up Air Control back until it stops. The
blower tends to cool the appliance. Leave the blower o󰀨
until the burn is well established, i.e., 30 minutes.
NOTE: For maximum e󰀩ciency and lowest emissions,
when operating the blower in either the automatic or
manual setting for the blower o󰀨 until the burn is well
established, i.e., 30 minutes.
2. The blower is equipped with ve setting switch. Increase
blower speed by turning the setting knob clockwise.
M. Opacity (Smoke)
Opacity is the measure of how cleanly your appliance is
burning. Opacity is measured in percent; 100% opacity is
when an object is totally obscured by the smoke column
from a chimney, and 0% opacity means that no smoke
column can be seen. As you become familiar with your
appliance, you should periodically check the opacity. This
will allow you to know how to burn as nearly smoke-free as
possible (goal of 0% opacity).
When burning your rst re, you will experience
smoke and odor from the appliance resulting from the
curing of paint and burning o󰀨 of any oils remaining
from manufacturing.
Open windows during initial burn to dissipate smoke
and odors!
Odors may be irritating to sensitive individuals.
Smoke detectors may activate.
CAUTION
N. Clear Space
Do NOT place combustible objects within 4 ft (1.2 m) of
the front of appliance (Figure 14.2).
• Mantel:
Avoid placing candles and other heat-sensitive objects
on mantel or hearth. Heat may damage these objects.
Do NOT place combustible objects in front of the
appliance. High temperatures may ignite clothing,
furniture or draperies.
WARNING
Figure 14.2
Maintain 4 ft (1.22m) clearance to
combustible in front of appliance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire Expedition II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Expedition II in the language / languages: English as an attachment in your email.

The manual is 6.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Expedition II

Quadra-Fire Expedition II User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info