Manual Quadra-Fire Classic Bay 1200 Pellet (page 13 of 40) (English)

815524

Zoom out

Zoom in

1/40

13 7027-802M 04/23

O. Thermostat Setup Options

Setup options for how the thermostat will function are

performed using a menu on the display screen.

TO ACCESS THE SETUP MENU:

Move the System Mode Switch into the OFF position,

and then hold down the COPY button for approximately 5

seconds until the screen changes. The menu will always

start with item #01, and is advanced to each following item

by a single press of the NEXT button. The options for each

item are changed using the UP or DOWN buttons.

ITEM #01 (CLK = CLOCK FORMAT):

• 12Hr, default: This displays the clock times using

standard AM and PM values.

• 24Hr: This displays the clock times using the military-time

format (example 22:00 hours, without using AM or PM).

ITEM #02 (TMP = TEMPERATURE SCALE):

• F, default: Shows all temperature values in Fahrenheit.

• C: Shows all temperature values Celsius.

ITEM #03 (PROGRAMMING STYLE):

• 7 Day, default: This style uses a separate program

routine for each of the 7 days in the week.

• 5/2 Day: This style uses a weekday program routine

for Monday, Tuesday, Wednesday, Thursday, Friday,

and a separate weekend program routine for Saturday

and Sunday.

• Manual Non-Programmable: In this setting, there are

no program routines for the thermostat to follow and

the temperature control will be set only by the UP and

DOWN buttons on the front panel.

ITEM #04 (PERD = EVENT OR PERIOD QUANTITY):

• 4P, default: Thermostat uses four Events per day (called

MORN, DAY, EVE, and NITE).

• 2P: The thermostat uses two Events per day (called DAY

and NITE).

NOTE: Event or Period Quantity feature is not

accessible during Manual Non-Programmable mode.

NOTE: This delay does not happen when the thermostat

is manually turned up and down.

Event Time Temperature

MORN 6:00 AM 70°F (21°C)

DAY 8:00 AM 62°F (17°C)

EVE 6:00 PM 70°F (21°C)

NITE 10:00 PM 62°F (17°C)

Table 13.1

ITEM #08 (TEMPERATURE DIFFERENTIAL):

• The thermostat works by turning your heating system on

and o󰀨 whenever the room temperature varies from the

desired set-point temperature.

• Use the UP/DOWN buttons to change the number value

between 1 and 9. Generally your system should cycle

on about 3 to 6 times per hour. A smaller di󰀨erential

number makes the system cycle more frequently, so the

room temperature is more precise and constant. A larger

di󰀨erential number will make the system remain on for a

longer duration each time and decreases the number of

cycles per hour.

• Default is set to 4.

P. Thermostat Operation Instructions

SET DAY AND TIME:

Place the SET switch into the DAY/TIME position. With the

day ashing press UP or DOWN to set the day or the week.

Press NEXT and the clock time will start ashing. Use UP or

DOWN to set the time; verify the AM/PM indicator is correct.

Return the SET switch to RUN position when nished.

HEATING:

Basic operation of the thermostat can be obtained with

the SET switch in the RUN position. The temperature

can be adjusted using the UP and DOWN buttons.

When the thermostat is rst powered on, it will follow

a default temperature routine that is preset from the

factory (Table 13.1).

ITEM #07 (DLAY = DELAY TIME):

• 5, default: Thermostat waits 5 minutes before turning

the system back on after it was last run. This internal

delay prevents the appliance from turning on too quickly

after shutting down. The 5 minute setting is ne for most

applications.

• 2: Same operation as above but reduced to 2 minutes

between state changes.

LCD DISPLAY BACKLIGHT:

The display screen is lighted to assist viewing at nighttime,

or in locations with low light levels. Press any button on the

front panel to activate the approximate 10 second backlight.

TEMPERATURE OVERRIDE:

While thermostat is in RUN mode, the set temperature

can be temporarily changed by pressing UP or DOWN.

The temporarily changed set temperature will return to

the programmed value stored in memory when start time

of the next upcoming scheduled event is reached (MORN,

DAY, EVE, OR NITE). While the temporary changed set

temperature is in e󰀨ect, the word OVERRIDE will be shown

on the display screen. To cancel, move TEMPERATURE

switch to OFF and back to HEAT again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Classic Bay 1200 Pellet in the language / languages: English as an attachment in your email.

The manual is 5.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Classic Bay 1200 Pellet

Quadra-Fire Classic Bay 1200 Pellet User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quadra-Fire Classic Bay 1200 Pellet Manual

Product: