Manual Quadra-Fire Classic Bay 1200 Pellet (page 14 of 40) (English)

815524

Zoom out

Zoom in

1/40

14 7027-802M 04/23

Q. Thermostat Temperature Programs

The thermostat by default has 4 separate program events

they are: MORN, DAY, EVE, and NITE. Each event ends at

the start time of the following event.

NOTE: When the last event is nished for each day or

group of days, the thermostat will advance forward into

the next day or group of days.

NOTE: If the thermostat is set for 2 events a day instead

of 4, the thermostat will only use the DAY and NITE

events.

R. Thermostat Other Features

TEMPERATURE CALIBRATION:

The internal temperature sensor in this thermostat is

accurately calibrated at the factory, and in most cases

alterations to this setting should not be needed. The

temperature calibration feature allows you to manually o󰀨set

the measured temperature by as much as plus or minus 5°F

(3°C) from its original value. If several thermostats are used

in the same house, this feature can be used to synchronize

this thermostat to the others.

Change the temperature calibration:

1. Move TEMPERATURE switch to OFF.

2. Move SET switch to RUN.

3. Press and hold both UP and DOWN buttons together for

at least 5 seconds; the words SET and CAL will appear

on the display along with a single ashing temperature

digit.

4. Use the UP or DOWN buttons to change the number of

degrees desired for adjustment; 0° is the default value

and also means no correction will be applied.

5. Press the NEXT button to accept the setting.

KEYPAD LOCKOUT:

There is the option to lock the front panel buttons to prevent

unauthorized tampering of your thermostat settings.

To Lock the Keypad:

1. Move TEMPERATURE switch to HEAT.

2. Move SET switch to RUN.

3. Perform a single press of each button in the

following sequence:

• NEXT, NEXT, NEXT, HOLD

A padlock will appear on the display screen.

To Unlock the Keypad:

1. Move TEMPERATURE switch to HEAT.

2. Move SET switch to RUN.

3. Perform a single press of each button in the

following sequence:

• NEXT, NEXT, NEXT, HOLD

A padlock will no longer be present on the display screen.

NOTE: All other features need to be completed in a timely

manner as the thermostat will time out after 10 seconds.

NOTE: The word COPY will not appear on the display

for Monday, but will display each day afterwards for

approximately one second and the day of the week will

automatically advance forward to the next day.

TEMPERATURE HOLD:

Temperature hold is used for maintaining a xed set

temperature; once a HOLD is initiated, the thermostat will

maintain the set temperature indenitely. To enter a HOLD

state, press the HOLD button one time and the word HOLD

will appear on the display. To cancel, press the HOLD button

once again.

6. Use steps 3 through 5 to set up the events for the rest of

the week or group of days.

7. Return the SET switch back to RUN.

COPY PROGRAM FEATURE:

Using similar instructions as set temperature programs the

COPY button will allow a whole day of set program events

to be copied to another day.

1. Move Temperature switch to HEAT as well as move SET

switch to TEMP PROG position.

2. Starting with Monday, use the UP or DOWN buttons to

adjust the start time and set temperature for the MORN,

DAY, EVE, and NITE events. Press the COPY button

and then press the NEXT button to advance to Tuesday.

3. With Tuesday displayed press COPY button. As

all programs events from Monday will be copied to

Tuesday (this will advance automatically to the next

day; Wednesday, as the word COPY will appear on the

screen for one second).

SET TEMPERATURE PROGRAMS:

1. Move TEMPERATURE switch to HEAT.

2. Move SET switch to TEMP PROG position.

3. Starting with Monday, use the UP or DOWN buttons to

adjust the start time and set temperature for the MORN

event, and then press NEXT button to advance.

4. Adjust the start time and set temperature of the DAY

event then press NEXT button.

5. Continue in this same manner to adjust the start time

and set temperatures for the EVE and NITE events

for Monday

Thermostat is protected against normal static electric

discharges, however to minimize the risk of damaging

the thermostat in extremely dry weather, please touch a

grounded metal object before touching the thermostat.

STATIC NOTICE

4. Continue in this pressing COPY button to set desired

days with original setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire Classic Bay 1200 Pellet in the language / languages: English as an attachment in your email.

The manual is 5.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire Classic Bay 1200 Pellet

Quadra-Fire Classic Bay 1200 Pellet User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quadra-Fire Classic Bay 1200 Pellet Manual

Product: