815517
22
Zoom out
Zoom in
Previous page
1/32
Next page
22 02/237033-351J
Magnet
Spade
Connectors
Snap Disc
Figure 22.1
C. Snap Disc
Service Part: SRV230-0470
1. Locatethesnapdiscbracketassemblyatthebottomleft
rear corner of the appliance.
2. A magnet holds the bracket to the appliance. Pull the
bracketdownawayfromtheappliancetoexposethesnap
disc.
3. Pull the snap disc and spade connectors up and out of
bracketasshowninFigure 22.1
4. Using a Phillips head screw driver, remove the 2 screws
from the snap disc and then remove the snap disc from
the spade connectors. Replace with new snap disc and
re-connect to spade connectors.
5. Push the snap disc and spade connectors back inside
bracketandre-attachthebrackettotheappliance.
D. Door Handle Assembly
Service Part: 832-0540
1. Install washer on door handle shaft.
2. Slide door handle through door.
3. Install second washer(s) as shown in Figure 22.2.
4. Installkeyingroove.
5. Align groove in latch cam with key; slide latch cam
over shaft
6. Installlocknutbutdonotovertighten,thehandleneeds
to move smoothly.
7. Install spring handle turning in a counter-clockwise
motion to required 2 inch (51mm) clearance location on
door handle rod (Figure 22.2).
Figure 22.2
Locknut
Door Cross Section
(example)
Latch Cam
Spacing
Washers Square Key
Door Handle
Spring
Handle
2 inch (51mm) clearance
required from bend in door
handle rod to end of spring
handle.
Donotovertightenlocknut.Thedoorhandleneedsto
move smoothly.
CAUTION
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire 3100 Millennium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire 3100 Millennium in the language / languages: English as an attachment in your email.

The manual is 5.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire 3100 Millennium

Quadra-Fire 3100 Millennium User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info