815517
24
Zoom out
Zoom in
Previous page
1/32
Next page
24 02/237033-351J
F. Tube Channel Assembly
Service Part: SRV7033-023
Removing Tube Channel Assembly
1. Remove the right side shield by removing 2 screws in the
backusingaPhillipsheadscrewdriver.
2. Remove 4 screws from channel access cover and
remove cover.
3. Locate 2 channel nuts inside of chamber and remove using
a7/16socketwrench.Slideouttubechannelassembly.
Figure 24.1
Channel
Access
Cover
Channel
Nuts (2)
Side Panel
Tube Channel
Assembly
Channel Cover
Screws (4)
Tube Channel Rack
Remove
2 Screws
Slide one gasket
over each tube
NOTE: Service Space
In order to replace the tube channel assembly a clearance
of 19 inches (483mm) is required on the right side of
appliance in order to remove the tubes with the appliance
in place.
If space is not available, the appliance will have to be
disconnected from the chimney to proceed with the
tube replacement.
NOTE:Soaktheboltswithpenetratingoilforatleast15
minutes before trying to remove them.
Replacing Tube Channel Assembly
1. Slideonegasketontoeachtube.
2. Slidethetubechannelassemblyintosideofreboxand
insert each tube into the corresponding hole in the tube
channelrackstartingwiththebackholerst.
3. Make sure tube channel assembly is ush against the
side of the appliance and secure with channel nuts.
4. Re-install channel cover and side shield.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadra-Fire 3100 Millennium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire 3100 Millennium in the language / languages: English as an attachment in your email.

The manual is 5.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire 3100 Millennium

Quadra-Fire 3100 Millennium User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info